finished my exhaust - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 02-16-2010, 03:27 AM Thread Starter
wheres the fat chicks?
 
PowerstrokeR00's Avatar
 
Join Date: May 2009
Location: Pekin, IN
Posts: 1,833
finished my exhaust

well i finished my exhaust today...4in downpipe all the way back to a 5in tip.my old down pipe has some soot on one side and i was wandering what would cause it?

2000 F-350 SD ccsb=185hp
Matt's Tunes=140hp
6637=20hp
2% window tint=25hp
4in straight pipe=50hp
Custom Fuel system w/ sump=50hp
Foil,AIH,EBPV delete=30hp
Wow...I'm making 500hp
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



Quote:
Originally Posted by stroke of luck View Post
i started sharting at an early age...
PowerstrokeR00 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 02-16-2010, 03:47 AM
PSN Veteran
 
tbolt's Avatar
 
Join Date: Nov 2008
Location: Peoria, Az
Posts: 3,940
Re: finished my exhaust

up pipe on pass side??? Are you low on boost or high egt??

Glen
early99 f350 cc, lb, 2wd, drw, A pillar autometer guages, CTS monitor, AIS intake, 4" turbo back cat delete diamondeye exhaust, dptuner, pmt1, jw vb, Swamps ab inj, Adrenaline oil, Coolingmist, 180*T, Trucool cooler, spin on trans filter, Firestone air bags, 2" frt leveling kit, now chased by a 34' toyhauler
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
tbolt is offline  
post #3 of 12 (permalink) Old 02-16-2010, 03:53 AM Thread Starter
wheres the fat chicks?
 
PowerstrokeR00's Avatar
 
Join Date: May 2009
Location: Pekin, IN
Posts: 1,833
Re: finished my exhaust

i dont see any more than 20psi of boost.and thats when i get into the go pedal.i have replaced both top up-pipe gaskets

2000 F-350 SD ccsb=185hp
Matt's Tunes=140hp
6637=20hp
2% window tint=25hp
4in straight pipe=50hp
Custom Fuel system w/ sump=50hp
Foil,AIH,EBPV delete=30hp
Wow...I'm making 500hp
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



Quote:
Originally Posted by stroke of luck View Post
i started sharting at an early age...
PowerstrokeR00 is offline  
 
post #4 of 12 (permalink) Old 02-16-2010, 04:05 AM
PSN Veteran
 
tbolt's Avatar
 
Join Date: Nov 2008
Location: Peoria, Az
Posts: 3,940
Re: finished my exhaust

Maybe the bottom or the exh manifold. Check my sig & in 60T and I can hit 26 -27psi. you have a leak somewhere on that side. My truck without the chip will push 17psi .

Glen
early99 f350 cc, lb, 2wd, drw, A pillar autometer guages, CTS monitor, AIS intake, 4" turbo back cat delete diamondeye exhaust, dptuner, pmt1, jw vb, Swamps ab inj, Adrenaline oil, Coolingmist, 180*T, Trucool cooler, spin on trans filter, Firestone air bags, 2" frt leveling kit, now chased by a 34' toyhauler
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
tbolt is offline  
post #5 of 12 (permalink) Old 02-16-2010, 04:16 AM Thread Starter
wheres the fat chicks?
 
PowerstrokeR00's Avatar
 
Join Date: May 2009
Location: Pekin, IN
Posts: 1,833
Re: finished my exhaust

would it even be a possibilty that my wastegate is stuck slightly open?

2000 F-350 SD ccsb=185hp
Matt's Tunes=140hp
6637=20hp
2% window tint=25hp
4in straight pipe=50hp
Custom Fuel system w/ sump=50hp
Foil,AIH,EBPV delete=30hp
Wow...I'm making 500hp
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



Quote:
Originally Posted by stroke of luck View Post
i started sharting at an early age...
PowerstrokeR00 is offline  
post #6 of 12 (permalink) Old 02-16-2010, 06:20 PM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: finished my exhaust

Nope. You have an exhaust leak somewhere right there.

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #7 of 12 (permalink) Old 02-16-2010, 06:45 PM Thread Starter
wheres the fat chicks?
 
PowerstrokeR00's Avatar
 
Join Date: May 2009
Location: Pekin, IN
Posts: 1,833
Re: finished my exhaust

is there a seal between the bottom of the up-pipe and the exhaust manifold?

2000 F-350 SD ccsb=185hp
Matt's Tunes=140hp
6637=20hp
2% window tint=25hp
4in straight pipe=50hp
Custom Fuel system w/ sump=50hp
Foil,AIH,EBPV delete=30hp
Wow...I'm making 500hp
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



Quote:
Originally Posted by stroke of luck View Post
i started sharting at an early age...
PowerstrokeR00 is offline  
post #8 of 12 (permalink) Old 02-17-2010, 12:18 AM
PSN Local
 
Join Date: Apr 2009
Location: South Puget Sound, WA
Posts: 338
Re: finished my exhaust

Quote:
Originally Posted by PowerstrokeR00 View Post
would it even be a possibilty that my wastegate is stuck slightly open?
The wastegate doesn't dump into the engine compartment, it dumps into the exhuast so isn't responsible for the soot.

2000 F350 SRW, 4wd, CCSB, PSD
Lowered rear end to F250 height, 4" exhaust w/ muff, foil delete, AIH delete, Ford AIS intake, tru-cool trans cooler, autometer under dash pod and gauges, Mile Marker hubs, 04 headlights, soft tonneau

18' 10k rated PJ car hauler
26' 7500# Creekside RV Trailer
Kioti CK30 tractor
Highbeam is offline  
post #9 of 12 (permalink) Old 02-17-2010, 01:59 AM
The Oracle
 
BigRed97's Avatar
 
Join Date: Jan 2008
Location: Saugus MA
Posts: 2,777
Send a message via AIM to BigRed97
Re: finished my exhaust

definatly have a leak if you only hit 20psi with a chip...i dont have one and i hit 24-25 psi

CCLB with some stuff done .....


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
BigRed97 is offline  
post #10 of 12 (permalink) Old 02-20-2010, 12:46 AM Thread Starter
wheres the fat chicks?
 
PowerstrokeR00's Avatar
 
Join Date: May 2009
Location: Pekin, IN
Posts: 1,833
Re: finished my exhaust

i used food grade stainless steel cause it was free(and really shiny).i welded a flange on the end of my downpipe and another on the next piece of pipe.the entire system can be unclamped from the downpipe in 2 seconds.$115 in it with the down pipe being $90+s&h






2000 F-350 SD ccsb=185hp
Matt's Tunes=140hp
6637=20hp
2% window tint=25hp
4in straight pipe=50hp
Custom Fuel system w/ sump=50hp
Foil,AIH,EBPV delete=30hp
Wow...I'm making 500hp
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



Quote:
Originally Posted by stroke of luck View Post
i started sharting at an early age...
PowerstrokeR00 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome