Gauge problem - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 16 (permalink) Old 01-11-2008, 02:01 AM Thread Starter
Oooo, White Lightning !
 
Dieselboy's Avatar
 
Join Date: Oct 2007
Location: Vancouver British Columbia
Posts: 2,921
Gauge problem

Well, while installing my trans temp I tore my boost line.....Its a mechanical gauge, but it comes with a little crush sleeve for each end a brass one.....Where can I buy one....What is the actually name for it ???

Race truck
2002 F-350XL RC/LB
NADP Race Trans/PCS'd
Lowered w/ traction bars
33" Nittos on 20" Fuel Hostages
Unlimited 450/400s
S475 on Irates mount
TE 17* with Gen3
DI Headers
Dieselboy fuel system
[email protected]
599.3 on BDs dyno

Tow pig
2000 F-250XLT EC/SB
Tuned
Exhaust
Intake
Dieselboy is offline  
Sponsored Links
Advertisement
 
post #2 of 16 (permalink) Old 01-11-2008, 02:08 AM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: Gauge problem

Its a 1/8 compression fitting... Most times you can pull it off and reuse it, but if not any GOOD plumbing supply place or hydraulic fitting place should have the parts...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #3 of 16 (permalink) Old 01-11-2008, 02:09 AM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: Gauge problem

Compression ferrel is the "real" name for it...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
 
post #4 of 16 (permalink) Old 01-11-2008, 02:19 AM Thread Starter
Oooo, White Lightning !
 
Dieselboy's Avatar
 
Join Date: Oct 2007
Location: Vancouver British Columbia
Posts: 2,921
Re: Gauge problem

Thanks.......You should write a sticky post on gauges .

Race truck
2002 F-350XL RC/LB
NADP Race Trans/PCS'd
Lowered w/ traction bars
33" Nittos on 20" Fuel Hostages
Unlimited 450/400s
S475 on Irates mount
TE 17* with Gen3
DI Headers
Dieselboy fuel system
[email protected]
599.3 on BDs dyno

Tow pig
2000 F-250XLT EC/SB
Tuned
Exhaust
Intake
Dieselboy is offline  
post #5 of 16 (permalink) Old 01-11-2008, 02:33 AM
All done now
 
Arisley's Avatar
 
Join Date: Sep 2007
Location: Arlington, TX
Posts: 22,486
Re: Gauge problem

I think you can even get them at Home Depot or Lowes. Look in the plumbing fittings by where the stuff to hook up ice maker hardware is.




Early '99 F350 DRW, Excab, LB. Auto. 2WD, 2010 bed, 2005 headlights, 298K, on my way to 1000K.
H2E, 238 Hybrids, Adrenaline oil, Tuned by Tony. DIY Regulated Return.
Arisley is offline  
post #6 of 16 (permalink) Old 01-11-2008, 02:44 AM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: Gauge problem

Quote:
Originally Posted by Arisley View Post
I think you can even get them at Home Depot or Lowes. Look in the plumbing fittings by where the stuff to hook up ice maker hardware is.
90% of the depots only have 1/4 but you could check...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #7 of 16 (permalink) Old 01-11-2008, 02:53 AM
PSN Veteran
 
Dieselgeek's Avatar
 
Join Date: Sep 2007
Location: Minnesota
Posts: 806
Re: Gauge problem

HD near me only had 1/4 when I needed one. You can also try any local truck shop, they should stock them for air brakes...

2002 F350 Reg Cab,4x4,7.3,6Spd.
Dieselgeek is offline  
post #8 of 16 (permalink) Old 01-11-2008, 02:55 AM
PSN Veteran
 
BigTonka's Avatar
 
Join Date: Aug 2007
Location: Minneapolis, MN
Posts: 607
Re: Gauge problem

any good auto parts store should have them in there gauge section

2006 F-250 CC SWB Amarillo with all the toys:
CAT back MBRP SS system, pillar gauges (ext,boost, trans, temp) cobra 29, rear flood lights installed F350 emblems in place of the 250's
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
and one freshly removed PSN sticker!!!!!
BigTonka is offline  
post #9 of 16 (permalink) Old 01-11-2008, 02:59 AM Thread Starter
Oooo, White Lightning !
 
Dieselboy's Avatar
 
Join Date: Oct 2007
Location: Vancouver British Columbia
Posts: 2,921
Re: Gauge problem

Alright........Thanks guys.

Race truck
2002 F-350XL RC/LB
NADP Race Trans/PCS'd
Lowered w/ traction bars
33" Nittos on 20" Fuel Hostages
Unlimited 450/400s
S475 on Irates mount
TE 17* with Gen3
DI Headers
Dieselboy fuel system
[email protected]
599.3 on BDs dyno

Tow pig
2000 F-250XLT EC/SB
Tuned
Exhaust
Intake
Dieselboy is offline  
post #10 of 16 (permalink) Old 01-11-2008, 03:01 AM Thread Starter
Oooo, White Lightning !
 
Dieselboy's Avatar
 
Join Date: Oct 2007
Location: Vancouver British Columbia
Posts: 2,921
Re: Gauge problem

I bought a 4 piller mount........So what y'all think I should put in the 4th hole
Pyro #2
Fuel pressure
Oil Pressure
Oil Temp
???
Any other ideas welcome.

Race truck
2002 F-350XL RC/LB
NADP Race Trans/PCS'd
Lowered w/ traction bars
33" Nittos on 20" Fuel Hostages
Unlimited 450/400s
S475 on Irates mount
TE 17* with Gen3
DI Headers
Dieselboy fuel system
[email protected]
599.3 on BDs dyno

Tow pig
2000 F-250XLT EC/SB
Tuned
Exhaust
Intake
Dieselboy is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome