need a measurement from a CC 172" longbed quick! - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 19 (permalink) Old 09-15-2009, 01:19 AM Thread Starter
PSN Local
 
Join Date: Nov 2008
Posts: 102
need a measurement from a CC 172" longbed quick!

I need a quick measurement for something I'm trying to figure out before I start looking for a truck.

*** the measurements I need must be taken from a 99-07 crew cab long bed 172" wheel base f250/350 ***

The measurements I need is from the gap right after the rear door, to where the bed starts (the gap in between the cab and the bed to be included in the measurement). I pointed it out in this pic-



Also, I need the measurement from that point by the rear door, to the center of the rear wheel. Again this has to be a 172" wheel base crewcab!

Thanks for anyone who takes a few minutes to grab these 2 measurements for me. I'm looking to buy one tomorow at an auction but before I drive out there I need these 2 measurments. Thanks again :-)
pimpedout97x is offline  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 09-15-2009, 04:05 AM
PSN Veteran
 
squeak12's Avatar
 
Join Date: Mar 2008
Location: Statesboro, GA
Posts: 580
Re: need a measurement from a CC 172" longbed quick!

Is that a CC/SB?

2001 F-250 Crew Cab 4x4
squeak12 is offline  
post #3 of 19 (permalink) Old 09-15-2009, 04:20 AM
PSN Veteran
 
06powerstroke's Avatar
 
Join Date: Feb 2009
Location: Santa Clarita, SoCal
Posts: 3,600
Re: need a measurement from a CC 172" longbed quick!

OK, went and took some quick measurements:

Door to bed was about 6.5"
Door to center of rear tire was about 61-62" (this one was a PITA in the dark by myself so I kinda just got close...)

2006 F250 CC LB FX4 Lariat
ARP studs, SCT X3 IDP & Gearhead tuned, S&B CAI, straight pipe, FASS 150/180, FCDP solid uppipe, Dieselsite coolant filter
2.5" BTS leveling kit, 35" Xtreme A/T's on XD Hoss 18's, N-Fab prerunner bar w/ 3 9" Hellas
Pioneer double din, JL components, 3 10" Pioneer subs

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
06powerstroke is offline  
 
post #4 of 19 (permalink) Old 09-15-2009, 04:35 AM Thread Starter
PSN Local
 
Join Date: Nov 2008
Posts: 102
Re: need a measurement from a CC 172" longbed quick!

Yea in the pic its a short bed but it was the first good side shot and it was just to show u what I needed :-)

And thanks for the measurements. I'm lookin into gettin a CC 350 dually tomorow, and down the road when I find a cheap totaled excursion in the front end, I wanna buy it and cut the rear body off and put it in place of the 8' bed and make a 6 door excursion, then more down the road get a 650 front clip and make that work so it'll be a 6 door f650 lol.. (I can't afford a 650 right now so I'm gonna settle for a 350) plus I want 4x4 and all the 650s I've seen are 2wd if I remember
pimpedout97x is offline  
post #5 of 19 (permalink) Old 09-15-2009, 04:37 AM
PSN Veteran
 
06powerstroke's Avatar
 
Join Date: Feb 2009
Location: Santa Clarita, SoCal
Posts: 3,600
Re: need a measurement from a CC 172" longbed quick!

Quote:
Originally Posted by pimpedout97x View Post
Yea in the pic its a short bed but it was the first good side shot and it was just to show u what I needed :-)

And thanks for the measurements. I'm lookin into gettin a CC 350 dually tomorow, and down the road when I find a cheap totaled excursion in the front end, I wanna buy it and cut the rear body off and put it in place of the 8' bed and make a 6 door excursion, then more down the road get a 650 front clip and make that work so it'll be a 6 door f650 lol.. (I can't afford a 650 right now so I'm gonna settle for a 350) plus I want 4x4 and all the 650s I've seen are 2wd if I remember
WOW, was not expecting a 6 door X as the project! You gotta post that up in the project forum when the time comes

2006 F250 CC LB FX4 Lariat
ARP studs, SCT X3 IDP & Gearhead tuned, S&B CAI, straight pipe, FASS 150/180, FCDP solid uppipe, Dieselsite coolant filter
2.5" BTS leveling kit, 35" Xtreme A/T's on XD Hoss 18's, N-Fab prerunner bar w/ 3 9" Hellas
Pioneer double din, JL components, 3 10" Pioneer subs

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
06powerstroke is offline  
post #6 of 19 (permalink) Old 09-15-2009, 04:57 AM Thread Starter
PSN Local
 
Join Date: Nov 2008
Posts: 102
Re: need a measurement from a CC 172" longbed quick!

I will for sure haha

I've been looking at the few companies that build them (obviously I don't have the cash to just have them build it for me) so I would like to take it on myself (with help from friends of course)

But from what I'm seeing, the excursion body from the rear doors back should sit perfect in place of the bed. My dad has an excursion so I'm going to use ur measurements, and measure from the front of his rear door, to the center of the rear wheel and see if its 61-62" like you said. If its a few inches off I may need you to remeasure (tomorow or whenever lol) to make sure its exactly 61 or 62" etc. But I'm at work now (damn graveyard shifts) so ill measure his real quick when I get home.

Only thing that confuses me, is if you google Alton truck company, look at there 6 doors, I emailed them and they said it was a 167" wheel base (which the f650 comes in a 167") but I don't see how the rear door would clear the wheel well, looks like it has to be a 172".. But as soon as I measure the excursion I will know for sure.
pimpedout97x is offline  
post #7 of 19 (permalink) Old 09-15-2009, 05:06 AM
PSN Veteran
 
Join Date: Nov 2007
Location: No man's land
Posts: 15,561
Re: need a measurement from a CC 172" longbed quick!

you better posts pics up of that project lol

02 f250
countryboyrob is offline  
post #8 of 19 (permalink) Old 09-15-2009, 05:34 AM Thread Starter
PSN Local
 
Join Date: Nov 2008
Posts: 102
Re: need a measurement from a CC 172" longbed quick!

Ill deff post pics when and if I ever do it. I will eventually just don't know how soon. I do wanna get the 350 and ill just drive it stock for now until I can get my hands on a 650 front end and a excursion for dirt cheap with a good rear body. Oh and I gotta wait until I have my own garage to start this lol
pimpedout97x is offline  
post #9 of 19 (permalink) Old 09-15-2009, 05:40 AM
PSN Veteran
 
Join Date: Nov 2007
Location: No man's land
Posts: 15,561
Re: need a measurement from a CC 172" longbed quick!

atleast make some powah too......

02 f250
countryboyrob is offline  
post #10 of 19 (permalink) Old 09-15-2009, 06:05 AM Thread Starter
PSN Local
 
Join Date: Nov 2008
Posts: 102
Re: need a measurement from a CC 172" longbed quick!

Yea for now I'm looking for a 350 dually 7.3L, I do not want the 6.0, but eventually I'd like to swap to a 24v cummins
pimpedout97x is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome