LMC body panels? - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 04-19-2011, 12:27 AM Thread Starter
PSN Local
 
smith7.3's Avatar
 
Join Date: Jan 2011
Location: fort wayne indiana
Posts: 173
Question LMC body panels?

OK so the bottom of my doors are going to sh$t quickly. I'm looking into just replacing the bottoms of my front doors, anybody have any experience with LMC?

Truck Parts and Truck Accessories for Chevy, GMC, Ford and Dodge Trucks from LMCTruck.com

thanks again

02 F250 Lariat 4x4 cc
zoodad
straight pipe
diy intake
gauges- egt,boost, trans temp
ELC - dieselsite thermostat & water pump
gutted ebpv and ped
PHP tunes = awesomeness
horrible paint!
3" leveling kit, same crappy tires for now!
smith7.3 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 04-19-2011, 12:49 AM
"Smoke A Lil Smoke"
 
chappy's Avatar
 
Join Date: Aug 2008
Location: Marshall Mi
Posts: 2,054
Re: LMC body panels?

Umm the parts I have bought were fine.It was better then a lot of the aftermarket panels. Replacement panels and stuff like this will never be exact. You will have to do some tweaking to get them perfect. Its just the way it is.

2004 f250 egr delete,studded,fass 95,suncoast convertor,itp RR,Banks intercooler,58v tuned ficm,Powermax turbo,Matts tunes,6in Icon and 35 toyos 20x12 fuels
Early 99 exlb 4wd-SOLD All Shaeffer oil
Will Iott -8/24/84-7/4/10 "We miss you buddy"
chappy is offline  
post #3 of 8 (permalink) Old 04-19-2011, 04:15 AM
No 6.0
 
zaairman's Avatar
 
Join Date: Sep 2010
Location: St. Charles/Rolla, MO
Posts: 625
Re: LMC body panels?

I bought my cab corners from them. Haven't put them on yet, but the quality seems good.

Zach
2000/2006ish Ford F-250 Larryette 7.3 Powerstroke 4x4
5" Sewer Pipe Exhaust, DIY 6637 Intake, Wicked Wheel'd, De-foiled, Missing EBPV, Edge Juice with Attitude, Few leaves added here and there, 35" BFGs, 16x10 Eagle Alloys, Alpine W200

SLAPS Member #153
zaairman is offline  
 
post #4 of 8 (permalink) Old 04-19-2011, 09:36 PM
Ridin Dirty Motorsports
 
randall's Avatar
 
Join Date: Apr 2009
Location: North Vernon,IN.
Posts: 608
Re: LMC body panels?

I get stuff from them and had no problems

02 7.3,swamps injectors,wicked wheel,south bend clutch, 6 position chip thanks to KT performance, 6" lift, 6" miter cut stacks
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


1986 chevy K10, built 350, 400 HP tuned by S.W.A.G. Scientific Wild Ass Guess

2005 YFZ450, Sparks, Hinson, Hot Cams, ASV



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
randall is offline  
post #5 of 8 (permalink) Old 04-20-2011, 12:09 AM Thread Starter
PSN Local
 
smith7.3's Avatar
 
Join Date: Jan 2011
Location: fort wayne indiana
Posts: 173
Re: LMC body panels?

cool thanks for the feedback!

02 F250 Lariat 4x4 cc
zoodad
straight pipe
diy intake
gauges- egt,boost, trans temp
ELC - dieselsite thermostat & water pump
gutted ebpv and ped
PHP tunes = awesomeness
horrible paint!
3" leveling kit, same crappy tires for now!
smith7.3 is offline  
post #6 of 8 (permalink) Old 04-22-2011, 03:59 AM
PSN Veteran
 
IL7.3 Powerstroker's Avatar
 
Join Date: Nov 2008
Location: round rock, Tx
Posts: 574
Send a message via Yahoo to IL7.3 Powerstroker
Re: LMC body panels?

what is your plan to fix lower door sills?
I have the dreaded lower panel door rust, too
Chicago winters/salt suck


2002 F-350 Supercab longbed
AFE intake Bully Dog 5" exhaust
Swamps sticks, DP tuned
IL7.3 Powerstroker is offline  
post #7 of 8 (permalink) Old 04-23-2011, 02:19 AM
PSN Local
 
Join Date: Apr 2009
Posts: 81
Re: LMC body panels?

All my doors and cab corners look like crap to... I think I will do this sometime this summer.

01 F250 - 9" lift with 37x13.5 MT ATZ's on some chrome 18 "Hot Wheels
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
05 Front End
4" duals, DIY 6637 Intake, SuperChips Programmer, More to come one day....I hope
Dog86 is offline  
post #8 of 8 (permalink) Old 04-25-2011, 08:53 PM Thread Starter
PSN Local
 
smith7.3's Avatar
 
Join Date: Jan 2011
Location: fort wayne indiana
Posts: 173
Re: LMC body panels?

IL7.3 Powerstroker -

I'm working with a friend who works for the gmc body shop here in fort wayne, i'm hoping to supply the lower panels and have him weld and paint it for me. I just need to pull the trigger on the patch panels from LMC. Then do all new weather stripping around the windows and doors to try and keep this from happening again for a while. Maybe some rhino lining as well.

02 F250 Lariat 4x4 cc
zoodad
straight pipe
diy intake
gauges- egt,boost, trans temp
ELC - dieselsite thermostat & water pump
gutted ebpv and ped
PHP tunes = awesomeness
horrible paint!
3" leveling kit, same crappy tires for now!
smith7.3 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome