SCT question - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 08-14-2007, 04:35 PM Thread Starter
< pissed off pumkin.
 
skylinedan's Avatar
 
Join Date: Aug 2007
Location: Sylvania Ohio
Posts: 1,880
SCT question

I thought I would ask you guys this instead of dealing with SCT dirrectly. But if I put the stock program back in my truck can I put a DP f-5 tuner on it instead? I really wish I had known about DP tuning before I had bought the SCT, I would have gone with a switch on the fly set up instead. I'm thinking 60 tow 80e 120 performance, and 140 extreem. You guys know your stuff when it comes to this, so I'm inklind to listen to you before SCT, they don't want to lose a customer.Thanks

Dan

2003 F-350 4x4, Ext cab. 7.3 AFE stage II 4" turbo back exhaust, garret GTP 38, 1.15 van turbine housing,EBPV deleated, non waste gated, ATS compresor housing, WW II, bellowed up pipes, CFM + spyder conversion, Hydra chip with Bill's tunes, CCV mod, Hutched, harpooned, RR fuel system, 6.0 trans cooler, Swamps IDM, HPX.
skylinedan is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 08-14-2007, 04:49 PM
Hated by All
 
Fast_Ashley's Avatar
 
Join Date: Jul 2007
Location: Quad Cities, U.S.A.
Posts: 747
Re: SCT question

Change it back to the stock setting and get a Dp chip. Then sell your Sct!!
My programmer got shattered and I was stuck with just an 80 horse program, then I installed the chip and it over-rided the superchips file.
Hope this helps.

PARIAH

2001 F-350
Resurection has begun.....
Fast_Ashley is offline  
post #3 of 7 (permalink) Old 08-14-2007, 04:49 PM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: SCT question

Sure... You can do anything you want, You can leave the SCT tune in there and the chip will just override it... or you can remove and sell the SCT...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
 
post #4 of 7 (permalink) Old 08-14-2007, 10:15 PM Thread Starter
< pissed off pumkin.
 
skylinedan's Avatar
 
Join Date: Aug 2007
Location: Sylvania Ohio
Posts: 1,880
Talking Re: SCT question

Ok , now if I do all that will someone beable to use it? I thought theses things were married to the truck once you did the initiall program. Maybe I'll luck out and Linda will see this, but that would be my only other concern. Do think my choices for tunes sound ok, the tow tune is proble the one I'm not sure on. If I ever get around to putting the goose in my bed I'll have a 7 horse trailer I can pull, loaded it grosses 14,000#. The 60 tow is for up to 10,000# I believe, but I don't plan on ever pulling it loaded to the max either. I'm not baby sitting 6 other people on a trail ride, . Thanks you guys for the input.

Dan

2003 F-350 4x4, Ext cab. 7.3 AFE stage II 4" turbo back exhaust, garret GTP 38, 1.15 van turbine housing,EBPV deleated, non waste gated, ATS compresor housing, WW II, bellowed up pipes, CFM + spyder conversion, Hydra chip with Bill's tunes, CCV mod, Hutched, harpooned, RR fuel system, 6.0 trans cooler, Swamps IDM, HPX.
skylinedan is offline  
post #5 of 7 (permalink) Old 08-14-2007, 10:20 PM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: SCT question

Quote:
Originally Posted by skylinedan View Post
Ok , now if I do all that will someone beable to use it? I thought theses things were married to the truck once you did the initiall program. Maybe I'll luck out and Linda will see this, but that would be my only other concern. Do think my choices for tunes sound ok, the tow tune is proble the one I'm not sure on. If I ever get around to putting the goose in my bed I'll have a 7 horse trailer I can pull, loaded it grosses 14,000#. The 60 tow is for up to 10,000# I believe, but I don't plan on ever pulling it loaded to the max either. I'm not baby sitting 6 other people on a trail ride, . Thanks you guys for the input.

Dan

Once tuned to stock you can sell it and the tunes. It will work for any truck in your same family the way it sits... But if they have a differant code It might not... PMT(01) and NVK(00) work together, but XLE(99) will not... get it?

I tow in my Extream setting... Just keep the RPM's up and away you go... I would not bother with anything less then a 60hp program.

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #6 of 7 (permalink) Old 08-14-2007, 10:36 PM Thread Starter
< pissed off pumkin.
 
skylinedan's Avatar
 
Join Date: Aug 2007
Location: Sylvania Ohio
Posts: 1,880
Talking Re: SCT question

Thanks Joe, I sent you a PM on the IAH mod because I didn't want to derail my own post .

Dan

2003 F-350 4x4, Ext cab. 7.3 AFE stage II 4" turbo back exhaust, garret GTP 38, 1.15 van turbine housing,EBPV deleated, non waste gated, ATS compresor housing, WW II, bellowed up pipes, CFM + spyder conversion, Hydra chip with Bill's tunes, CCV mod, Hutched, harpooned, RR fuel system, 6.0 trans cooler, Swamps IDM, HPX.
skylinedan is offline  
post #7 of 7 (permalink) Old 08-14-2007, 11:04 PM
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,083
Re: SCT question

send me that PM again... I got an E-mail notifacation... but nothing here? Weird...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome