Well, i am buying the AirDog fuel system from Dennis today and i notice there are two different pumps. one is a 95gph and the other is 150gph. Dennis has a note on his site that states as follows;
Standard AirDog units flow ~95gph. There is a 150gph AirDog available for those running extremely large aftermarket fuel pumps with flow rates in excess of 85gph. There is no extra charge for the 150gph AirDog, but we don't recommend it's use unless you're sure you need it. Many of the commonly used aftermarket pumps (like the Aeromotive A1000 and SX for example) will work just fine with the 100gph AirDog. We recommend taking a close look at the flow curve for the pump you will be using, if the flow is below 85gph at the pressure you will be running, the 100gph unit will work just fine.
Now, i will be installing this at the same time i am doing Hybrids and also doing a Walbro pump along with the regulated return/fuel bowl delete. Do i need the 150 gph pump or will the 95gph work fine. I know alot of guys say go big or go home, but being that i am in Korea right now and not near my truck, im not sure what i will need. Any help would be appreciated. Thanks in Advance.