My 97 TTB is in the junk pile and my 02 superduty axle is ready to be finished. The Mile marker site has the same hub fitting both axles. Does this mean the TTB hubs will fit on the superduty? If not is around $150 plus the conversion kit a good price for the milemarker? Thanks, Don
Pretty sure its the same hub, try it and see!
FYI your TTB was a dana 50 your new SD axle is a dana 50 also
Milemarker 449SS kit runs about $150 new comes with everything you need to install
You do not need the conversion kit unless you are switching from auto to manual hubs, the conversion kit is simply inner and outer spindle nuts and the lock ring washer...most auto parts places carry these also
1997 CCFB 7.3, ZF5, 4x4, 4.10, baby swamps, TS6, E99 spyder, RiffRaff pipes, 6.0 FMIC, RSK, 315 toyo at To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2001 Excursion 7.3, auto, 4x4, 3.73, collecting parts for suspension lift
2000 E350 7.3, auto 2wd, 3.73, toy hauler camper conversion...researching 4x conversion
21.9 liter family