Will my transmission hold and what turbo? - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 16 (permalink) Old 01-15-2010, 12:44 AM Thread Starter
I like turtles
 
NE-STROKE's Avatar
 
Join Date: Nov 2009
Location: omaha Ne
Posts: 2,604
Will my transmission hold and what turbo?

Ok I dont know what to do.
The injectors I bought are 530 ad single shot hybrids with stock nozzles. I talked to John at Rosewood and he will put in 100% nozzles for pretty cheap. The way it looks is the way they sit with the right turbo and tuning is around the 425 mark. With the zozzles around 500.
Now im wondering if my tranny will take the 500.
I have a sucoast converter and all these suncoast internals- master rebuild kit, dual load center suport, transgo tugger kit, by pass eliminators and the .427 line valve. No billet shafts..
Im thinking a mod qssb or mod h2e if I do nozzles. If I leave them as is Im thinking qssb or h2e.
My truck is a early 99 and have dp right now but considering swamps.
I would love to be around the 500 but dont have the money for a bts.

So the question is will my transmision handle the injectors with the bigger nozzles?
What turbo should I go with?

Thanks
NE-STROKE is offline  
Sponsored Links
Advertisement
 
post #2 of 16 (permalink) Old 01-15-2010, 12:49 AM
PSN Veteran
 
Austinj427's Avatar
 
Join Date: Mar 2009
Location: Parker, Colorado
Posts: 1,477
Re: Will my transmission hold and what turbo?

Modded h2e.

Its a toss up with the tranny. I have heard of some suncoasts taking power like that, and others that wont.

Good luck
Austinj427 is offline  
post #3 of 16 (permalink) Old 01-15-2010, 01:52 AM
Back in Black
 
stroken's Avatar
 
Join Date: Sep 2008
Posts: 1,379
Re: Will my transmission hold and what turbo?

regular h2e is a total waste of money, go modded. I think your trans will hold 500, but probably not much more.

425 hp on a stock nozzled injector? what supporting mods? fuel, oil, ect

2009 F-250 ccsb black/black

Lowered 4400lb spring, 20x10 MM962, Nitto 420, traction bars, 5" exhaust 7" MBRP black stack, SCT - Innovative tunes, IDP cold side IC pipe, MPD trans. Blacked outtttt
stroken is offline  
 
post #4 of 16 (permalink) Old 01-15-2010, 02:05 AM
PSN Veteran
 
00Rich's Avatar
 
Join Date: Dec 2007
Location: Roy,Utah
Posts: 1,711
Re: Will my transmission hold and what turbo?

id do a modded qssb then save up for a bts


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2008 F-250 FX4 cc,4x4


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
00Rich is offline  
post #5 of 16 (permalink) Old 01-15-2010, 02:09 AM Thread Starter
I like turtles
 
NE-STROKE's Avatar
 
Join Date: Nov 2009
Location: omaha Ne
Posts: 2,604
Re: Will my transmission hold and what turbo?

I have a rr return, about to order a adrenaline, intake, 4 inch exhaust.
NE-STROKE is offline  
post #6 of 16 (permalink) Old 01-15-2010, 02:27 AM
Back in Black
 
stroken's Avatar
 
Join Date: Sep 2008
Posts: 1,379
Re: Will my transmission hold and what turbo?

gonna need some fuel

2009 F-250 ccsb black/black

Lowered 4400lb spring, 20x10 MM962, Nitto 420, traction bars, 5" exhaust 7" MBRP black stack, SCT - Innovative tunes, IDP cold side IC pipe, MPD trans. Blacked outtttt
stroken is offline  
post #7 of 16 (permalink) Old 01-15-2010, 02:34 AM Thread Starter
I like turtles
 
NE-STROKE's Avatar
 
Join Date: Nov 2009
Location: omaha Ne
Posts: 2,604
Re: Will my transmission hold and what turbo?

I can afford to up grade my fuel system if needed
NE-STROKE is offline  
post #8 of 16 (permalink) Old 01-15-2010, 05:02 PM
Village Idiot
 
southmike's Avatar
 
Join Date: Jul 2007
Posts: 8,209
Re: Will my transmission hold and what turbo?

I'd look at a modded h2e Beans Diesel Performance - 99-03 Power Stroke Custom H2E Turbocharger System w/ BDP Upgraded Turbo (Powered by CubeCart)

pretty much my plan ...modded turbo, 238~250 hybirds,pi tc and a vb.
I am not doing a bts until I have to or can afford to.
I'm going with johnathan at beans for tunes since they are very familiar with that combo and have a dyno to tune with, which always helps .
even if your truck is not going on the dyno there would have been one with the same setup.

Early 99 f350 4x4 crew cab, auto. pmt2 pcm
2001 cup holder ,T500, MAX AC ASSIST AC mod, Diy Twin tymar, TS chip, Powerslots & Hawk pads, ford AIC, ..... with big fat want to list.
southmike is offline  
post #9 of 16 (permalink) Old 01-16-2010, 01:00 AM Thread Starter
I like turtles
 
NE-STROKE's Avatar
 
Join Date: Nov 2009
Location: omaha Ne
Posts: 2,604
Re: Will my transmission hold and what turbo?

Will a s300 be enought turbo for this? A guy on here has the turbo and kit for 1500.
NE-STROKE is offline  
post #10 of 16 (permalink) Old 01-16-2010, 01:08 AM
PSN Veteran
 
TARM's Avatar
 
Join Date: Nov 2009
Location: Winchester, Virginia
Posts: 4,865
Re: Will my transmission hold and what turbo?

A modded one like a WOP QSSB/GQSSB yes other than that someone else will need to answer.
TARM is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome