Running again!!! - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 20 (permalink) Old 10-06-2009, 09:34 PM Thread Starter
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,082
Running again!!!

Well, I finally got her running again on sunday. Need to throw the front end stuff on, change out the water for coolant and drive away.

$800 for a complete long block, injectors, turbo and all... Sold most of the stuff, injectors turbo and such and I am in it about $400...

Only drove it to the country store and back (about 3 miles or so) but I am VERY impressed with the swamps tuning and the new injector nozzles.

Plan for now, leave her at home, drive the company crummy until they get wind of mine running. I miss driving her, but I would rather leave her at home, drive this one as long as I can. Not to mention the money I was saving to do the front gears... went to the motor build, so I still have 4.30's in the back and 3.73's in the front.

Anyone want to install a set of gears cheap for me...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old 10-06-2009, 09:38 PM
Banning Smut
 
PTSUPERD's Avatar
 
Join Date: Jul 2007
Location: Southeast Texas
Posts: 19,093
Re: Running again!!!

Congrats Joe!





To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
PTSUPERD is offline  
post #3 of 20 (permalink) Old 10-06-2009, 09:46 PM
The Fireman
 
big_stroker's Avatar
 
Join Date: Apr 2008
Location: Ridgeville, IN
Posts: 4,810
Send a message via AIM to big_stroker Send a message via Yahoo to big_stroker
Re: Running again!!!

Glad you got it running again.

1999.5 F-250 7.3l 4x4 6 spd Ported Heads, Head studs, valve springs, DI Push Rods, DI RR, 38R, Walbro fuel pump, 238cc Injectors from Nate @ Unlimited Diesel and Tuned by Matt @ Gearhead Automotive


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
big_stroker is offline  
 
post #4 of 20 (permalink) Old 10-06-2009, 09:48 PM Thread Starter
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,082
Re: Running again!!!

...7 months later... Thanks!

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #5 of 20 (permalink) Old 10-06-2009, 09:49 PM
FNG
 
Dave's Avatar
 
Join Date: Nov 2007
Location: Trempealeau WI
Posts: 6,018
Re: Running again!!!

Glad its back up and running man. That was a long time

Dave G

06 F250 Lariat 4x4 leveled on 35s

4 inch flowmaster exhaust
Bulletproof diesel egr delete.
Bulletproof diesel FICM
Performance Machine & Manufacturing Coolant Filter Kit

ECM and FICM tuned by Bill at PHP SCT tunes from Gearhead, Innovative and Wildman
Dave is offline  
post #6 of 20 (permalink) Old 10-06-2009, 09:51 PM Thread Starter
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,082
Re: Running again!!!

Quote:
Originally Posted by Dave View Post
Glad its back up and running man. That was a long time
Thanks!



No money... Everything was done on a shoe string, then a few issues, and then I just lost interest.

Really, the only reason I worked on it sunday is I filled the block with water to get it started and cleaned out, and now its starting to frezze... Figured I better get it running and some coolant in there, or I would have a snow white issue...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
post #7 of 20 (permalink) Old 10-06-2009, 10:06 PM
PSN Veteran
 
Join Date: Jul 2007
Location: kansas
Posts: 5,464
Re: Running again!!!

congrats joe.

2013 ccsb 4x4-stock
99 ccsb 4x4- built to the hilt, wife's DD!
Short Bus is offline  
post #8 of 20 (permalink) Old 10-06-2009, 10:08 PM
lets roll
 
thunderstroke's Avatar
 
Join Date: Jun 2008
Location: ontario canada
Posts: 60
Re: Running again!!!

So what was the problem?

2000 f-250, dp f-5, ddp 120hp single shots, mbrp turbo back, itp boost fooler, itp pre-pump kit, banks billet torque converter, coolingmist cmgs
thunderstroke is offline  
post #9 of 20 (permalink) Old 10-06-2009, 10:11 PM
PSN Veteran
 
01platinum's Avatar
 
Join Date: Oct 2008
Location: Willis,Tx
Posts: 3,138
Re: Running again!!!

Way to go Joe glad the truck is back up and running. Sure you are. Post some pics when you can.

Real Diesels Have Stacks
New Tunes by Matt @ Gear Head - Auto Meter Gauges from Nate @ PTP
Air Dog II Fuel Pump
First RR Fuel System built by hand @ Murff Racing

More to come soon..........
01platinum is offline  
post #10 of 20 (permalink) Old 10-07-2009, 12:20 AM Thread Starter
<<< THE GAUGE WHORE...
 
CSIPSD's Avatar
 
Join Date: Jul 2007
Location: Bend, OR
Posts: 12,082
Re: Running again!!!

Quote:
Originally Posted by 01platinum View Post
Way to go Joe glad the truck is back up and running. Sure you are. Post some pics when you can.







I'll get a few more when I get my laptop back, it crashed last week...

[CENTER]01 F-250 SC PSD,430k,16 Isspro Gauges, AFE-2,CCV Mod,IAH delete,map reg,Modded H2e, 6.0 IC, 230/100, Studs, 910 springs, Forged rods, Hydra chip, Swamps HVHF IDM, MBRP 4" dual's, Aero, 6" tip's, 4" Revtek lift, 37/12.5/16.5 MT's
Joe
CSIPSD is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome