Srp1.1 or t-500 - PowerStrokeNation : Ford Powerstroke Diesel Forum
Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 78 (permalink) Old 06-19-2013, 06:29 PM Thread Starter
PSN Local
 
Join Date: Jan 2013
Posts: 199
Srp1.1 or t-500

Which one is better for 238cc 100% hybrids. With room to grow! Planning on 300cc 200% in the near future.
ibleeddiesel is offline  
Sponsored Links
Advertisement
 
post #2 of 78 (permalink) Old 06-19-2013, 07:09 PM
the stryker god
 
Join Date: Nov 2008
Location: 615 'till I DIE!!!
Posts: 3,659
Re: Srp1.1 or t-500

Definitely srp1.1
bruce51d is offline  
post #3 of 78 (permalink) Old 06-19-2013, 07:53 PM
PSN Veteran
 
zilla68's Avatar
 
Join Date: Jan 2009
Location: Moore, Oklahoma
Posts: 1,557
Re: Srp1.1 or t-500

is the stage 1 and stage 2 pumps the same price? I see they say over 200cc injectors you need the stage 2 pump.

also, on the obs, it says fuel bowl must be relocated. I am sure most guys would be running efuel anyways, but if you did have the stock bowl, I wonder how much relocating is needed.

Chris

Moore, Oklahoma



1996 Ford F350 4x4 Crew Cab PSD
6637 tymar
285-75-16 BFG All Terrains/Weld Wheels
3:55 gears
Automatic with billet convertor, tugger and alto discs
New Gearhead Tunes:
1 heavy tow
2 stealth mode
3 tow/econ
4 street perf
5 all out
6 high idle
1.0 housing
exhaust
zilla68 is offline  
 
post #4 of 78 (permalink) Old 06-19-2013, 10:12 PM
this $hit is expensive!
 
ccf350stroker's Avatar
 
Join Date: Aug 2010
Location: burgettstown, pa
Posts: 534
Re: Srp1.1 or t-500

If you plan on gettin into those 300's go with srp, much better pump with larger injectors. My t500 works well with my 250/100's but id say a 250/200 would top out the t500. Plus I think stealth offers a pretty nice warranty now if im not mistaken.

97 f350 cclb 7.3 5 spd on 35's, ffd 250/100's, s465 turbo, irate t4 mount, 3 inch plenums, t-500 hpop, arp's, sb pushrods, comp 910's, gearhead tunes, e fuel, and valair dual disk clutch
ccf350stroker is offline  
post #5 of 78 (permalink) Old 06-19-2013, 10:31 PM
Busy Busy
 
Marty's Avatar
 
Join Date: Jul 2007
Location: Elkton, MD
Posts: 9,004
Re: Srp1.1 or t-500

I use the SRP1.1 for setups like that. However getting pumps has been an issue. I have only installed a few T500's and they were all on >250cc so I can't comment on 300cc injectors.

443.553.9234 - 410.392.3262

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Elkton, Maryland

2001 F250 Platinum - 11.62 @ 115.76 on Nitrous
2007 F250 - 10.916 @ 122.86 on Fuel
2005 F450 - Tow Bitch
Marty is offline  
post #6 of 78 (permalink) Old 06-19-2013, 10:34 PM
Busy Busy
 
Marty's Avatar
 
Join Date: Jul 2007
Location: Elkton, MD
Posts: 9,004
Re: Srp1.1 or t-500

Any 17* style pump that is in good shape will work with 238's......

443.553.9234 - 410.392.3262

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Elkton, Maryland

2001 F250 Platinum - 11.62 @ 115.76 on Nitrous
2007 F250 - 10.916 @ 122.86 on Fuel
2005 F450 - Tow Bitch
Marty is offline  
post #7 of 78 (permalink) Old 06-19-2013, 10:43 PM
Village Idiot
 
southmike's Avatar
 
Join Date: Jul 2007
Posts: 8,209
Re: Srp1.1 or t-500

For 238 I would do a t500 or adrenaline .
For 300 I would ask bob about the adrenaline it may need more
I would ask joey about a t1 or twins at that level...
Also send thuglike a pm I believe no limit has something in the works.
Probably similar to the gen 2 stealth bean had for a bit if I guessed. ... ut that is pure speculation.

Too many srp failure to trust that on a dd.....however that may have been corected

Early 99 f350 4x4 crew cab, auto. pmt2 pcm
2001 cup holder ,T500, MAX AC ASSIST AC mod, Diy Twin tymar, TS chip, Powerslots & Hawk pads, ford AIC, ..... with big fat want to list.
southmike is offline  
post #8 of 78 (permalink) Old 06-19-2013, 11:07 PM Thread Starter
PSN Local
 
Join Date: Jan 2013
Posts: 199
Re: Srp1.1 or t-500

alrighty, iv been looking for awhile i modded my own 17* pump to have a lttle more output but. im planning on going with a bigger set of injectors pretty soon. it will not be my dd its gunna be my sled truck my goal is a relaible 600+. but thanks for the info.
ibleeddiesel is offline  
post #9 of 78 (permalink) Old 06-19-2013, 11:15 PM
PSN Local
 
Join Date: Jan 2013
Posts: 211
Re: Srp1.1 or t-500

I'd talk to Joey and see what he says. His pumps have proven to be ultra reliable and his customer service is hard to beat. Im sure the Srp is a good pump but I have heard of a few failures myself. DD or not who wants to change pumps for fun......ok we do but just sayin lol
14fan77 is offline  
post #10 of 78 (permalink) Old 06-20-2013, 03:29 AM
m j
PSN Veteran
 
m j's Avatar
 
Join Date: Nov 2012
Location: BC Canada
Posts: 1,549
Re: Srp1.1 or t-500

so what makes a t500 anything other then a used 17 pump?
hpop is a fixed displacement pump so if you aren't making the stroke longer or the bores larger you arent doing very much.

i ordered an srp1.1
m j is offline  
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome