Re: AERO HEADLAMPS
There is some write ups online about how to cut the header panel. I don't know where to locate them. Maybe someone else will chime in. I didn't worry about the wiring. I am just going to direct wired the Hid's I install so they don't use the wiring plug.. If you had your headlight removed and the 05 lights in hand you would see what needs to be removed.. Its pretty simple. I think all the cutting took about 10 minutes for the first light. I used a grinder with a cut off wheel for most of it. But anything that would cut fiberglass would get the job done.
99.5 F-350 6-speed Daily Driver/Tow Rig.
Engine - Empire Diesel Performance
Air - Empire Diesel Performance Compounds Procharger Primary / Garrett 38R Secondary
Oil- Swamps Gen-3
Fuel - B-codes