Injectors?? Best for me?? - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 10-15-2008, 02:53 AM Thread Starter
PSN Veteran
 
73stroke99's Avatar
 
Join Date: Jul 2008
Location: Richmond, Va
Posts: 611
Injectors?? Best for me??

Just what it says, I dont drive my truck much at all and i want to start pulling more often so i sold my lift and dropped back to 6inches and 35s. Now i want injectors maybe a race injector or a hot street. Single shot prefered. I have a gtp38r turbo, intake, exhaust and custom tunes from elite diesel. Oh and a bts trans. and im going to buy Dennis's regulated return and bowl delete kit to install at the same time as injectors. What do you recamend for my application.
Thanks
John

02 F250 s/c, 6ft bed,6 speed,4x4,148k...work in progress...
~ TS chip
~ Intake by me
~ 5 inch straight piped exhaust
~ 2 inch leveling kit with 35s
To come:
keeping this one modest, fuel system, maybe turbo, new tuning, South bend clutch

SOLD~ 04 F250 6.0 ccsb

SOLD~99.5 f250 scsb,auto, 4x4..modded
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
73stroke99 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 10-15-2008, 03:02 AM
Snake Oil Salesman
 
mattr66's Avatar
 
Join Date: Apr 2008
Location: Bryan, TX
Posts: 5,346
Re: Injectors?? Best for me??

some 230-250cc hybrids with fresh EDM nozzles will be nice for your setup. They can knock down good mileage and be awesome power makers. You can put some nitrous on top of everything and make even more power than what your 38r will clean up.

Matt Robinson
Gearhead Automotive Performance

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Quote:
Originally Posted by PSDPlayer View Post
If you have nozzles that were Extrude honed over and over and over again. It will look like a porn stars ass.hole where the pintle is supposed to seal.
mattr66 is offline  
post #3 of 12 (permalink) Old 10-15-2008, 03:02 AM
10.61 @ 128 MPH
 
Powersmoker's Avatar
 
Join Date: Jul 2007
Location: Outer Banks, NC
Posts: 2,297
Send a message via AIM to Powersmoker
Re: Injectors?? Best for me??

230cc hybrids would be great for that setup.

2000 F-250 Regular Cab
1069 RWHP 1768 Torque
10.55 @ 129 MPH NOS

2000 F-350 ECLB DRW
Tow Rig


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Murff Racing Twisted Diesel
Empire Diesel DieselSite
Swamps Diesel
Powersmoker is offline  
 
post #4 of 12 (permalink) Old 10-15-2008, 03:28 AM
Back to Civilian Life!!
 
MILFORD's Avatar
 
Join Date: Jul 2007
Location: Naperville, IL
Posts: 2,469
Re: Injectors?? Best for me??

Go with a good set of Hybrids. You will love having a set of injectors in the truck.

2003 F-250 4x4 7.3 liter PSD EXT. cab SB. Wilson 2000 antenna, Uniden PC78 peaked and tuned with a connex 250 Linear Amp.
MODS: BTS Tranny, DIY Tymar, Hypermax 3.5 DP to 5" back, TW tunes, DI's GT38R BB turbo, autometer boost, pyro, trans, water temp a Scangauge and Firestone rear air bags.
MILFORD is offline  
post #5 of 12 (permalink) Old 10-15-2008, 04:37 AM
Drink til she's cute
 
Thuglike's Avatar
 
Join Date: Jul 2007
Location: Skillman, NJ
Posts: 4,873
Re: Injectors?? Best for me??

Quote:
Originally Posted by Powersmoker View Post
230cc hybrids would be great for that setup.
x2!! It will be real fun to drive and tow real nice

2008 F-250: High Powers / Dual K16 / 60% Nozzles
ELITE
NO LIMIT
SWAMPS
GEARHEAD
INNOVATIVE
Thuglike is offline  
post #6 of 12 (permalink) Old 10-15-2008, 02:49 PM
Snake Oil Salesman
 
mattr66's Avatar
 
Join Date: Apr 2008
Location: Bryan, TX
Posts: 5,346
Re: Injectors?? Best for me??

and some 80% EDM nozzles will get great mileage with the proper tuning.... if you want a little more power the 100% nozzle on a 250cc would be better especially if you want to make another 100hp or so above what your turbo will clean up by using some turbo in a bottle.

Matt Robinson
Gearhead Automotive Performance

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Quote:
Originally Posted by PSDPlayer View Post
If you have nozzles that were Extrude honed over and over and over again. It will look like a porn stars ass.hole where the pintle is supposed to seal.
mattr66 is offline  
post #7 of 12 (permalink) Old 10-15-2008, 03:29 PM
Sponsor
 
Join Date: Aug 2007
Posts: 193
Re: Injectors?? Best for me??

Some Hybrids and 100% nozzles will net you some good gains on HP. You should be right in at 500hp with everything running good. We should have some numbers on on a Stage 2 to Stage 3 conversion by friday. I'll try to remember to post up what we find in this thread so you can see them to compare.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

615-962-8291
Cass is offline  
post #8 of 12 (permalink) Old 10-15-2008, 06:10 PM Thread Starter
PSN Veteran
 
73stroke99's Avatar
 
Join Date: Jul 2008
Location: Richmond, Va
Posts: 611
Re: Injectors?? Best for me??

Quote:
Originally Posted by mattr66 View Post
You can put some nitrous on top of everything and make even more power than what your 38r will clean up.
What do you mean by that? also will these injector need big oil as a must? Wheres the best place to get them?

thanks
John

02 F250 s/c, 6ft bed,6 speed,4x4,148k...work in progress...
~ TS chip
~ Intake by me
~ 5 inch straight piped exhaust
~ 2 inch leveling kit with 35s
To come:
keeping this one modest, fuel system, maybe turbo, new tuning, South bend clutch

SOLD~ 04 F250 6.0 ccsb

SOLD~99.5 f250 scsb,auto, 4x4..modded
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
73stroke99 is offline  
post #9 of 12 (permalink) Old 10-15-2008, 06:42 PM
Snake Oil Salesman
 
mattr66's Avatar
 
Join Date: Apr 2008
Location: Bryan, TX
Posts: 5,346
Re: Injectors?? Best for me??

Quote:
Originally Posted by 73stroke99 View Post
What do you mean by that? also will these injector need big oil as a must? Wheres the best place to get them?

thanks
John
Hybrids don't need big oil. Cass has some great injectors from what I hear as do Swamps and DI.

The 38R can clean up close to 500HP of fuel and anything above that you will need some nitrous. If your end goals don't involve going with nitrous the smaller cc hybrid and nozzle will be best but if you want to push 575+ with some nitrous later then the 250cc with 100% nozzle can get you there...

Matt Robinson
Gearhead Automotive Performance

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Quote:
Originally Posted by PSDPlayer View Post
If you have nozzles that were Extrude honed over and over and over again. It will look like a porn stars ass.hole where the pintle is supposed to seal.
mattr66 is offline  
post #10 of 12 (permalink) Old 10-15-2008, 11:47 PM
Proud PSN Sponsor
 
Deputydog's Avatar
 
Join Date: Aug 2007
Location: Spokane, WA
Posts: 3,090
Re: Injectors?? Best for me??

I am running Casserly's hybrid injectors and put down 480 hp with a boost leak and big oil.

2002 Ford F350 Crewcab 4X4 SRW, Twin turbos
820 HP on 05/19/12

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Toll Free 866-379-8685
Deputydog is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome