Ford Power Stroke Nation banner

Door lock issues and others

1K views 9 replies 4 participants last post by  Blue-Truck-Nut97 
#1 ·
So let’s see if I can get some insight.
02 Excursion Limited 7.3 4x4

Question #1
Power door locks only work on lock, ohms are good through the entire door harness and you can hear the VSM (Vehicle Security Module) clicking during lock operation, replaced main switch just thinking it might be the issue but no dice. Drivers door open and key in the ignition and on, the doors lock and then the drivers door unlocks. Any input????

Question #2
Overhead lie-o-meter wasn’t working, pulled apart and found loose diodes, pushed them back in place and it lite up and the display works but now it has a fuel gauge issue, coincidence or not???

Question #3
Back hatch glass is leaking water, easy self repair or take it to a glass shop?


Sent from my iPhone using Tapatalk
 
#2 ·
1) Google tin foil mod or replace the lock actuators.
2) my guess is coincidence. What's it doing?
3) if its the rubber gasket. Do it yourself. If its glass. Take it in.
 
  • Like
Reactions: Blue-Truck-Nut97
#3 ·
Can’t find anything about a Tin Foil Mod

Fuel gauge reads full one key cycle and empty the very next key cycle, but only started after removing TS6 Tuner.

Window seal not the hatch seal so will probably end up going out for repair.


Sent from my iPhone using Tapatalk
 
#4 ·
#8 ·
Damn tapatalk or auto guide. Try opening it up in psn then click the link.
 
#9 ·
So top right hit the three dots then go to web view and click the link. It goes to the correct spot.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top