Ok at wits end been watching videos an reading for the last 4 days - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 04-15-2019, 01:12 AM Thread Starter
PSN Newb
 
Natdog's Avatar
 
Join Date: Apr 2019
Posts: 4
Ok at wits end been watching videos an reading for the last 4 days

Ok for the last several days I've changed the ipr,icp,cam sensor,ebp sensor changed out a bad injector and I'm still having rough idle times when it wouldn't start just free turn like it wasn't firing no smoke out the exhaust then went to pull out change gears and like I cut the switch off died towed it back after sitting a day it crunk back up still idled rough but had good power had a call for a tow was going down the Hwy for a couple miles an like I let off the pedal an lighly pressing the brake but didn't an wasn't I slowed to a stop and it cut off to not start back any help I'm stuck gonna take it to a mechanic if I can't figure something out quickly it's how I make a living(tow truck)
Natdog is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 04-15-2019, 02:43 AM Thread Starter
PSN Newb
 
Natdog's Avatar
 
Join Date: Apr 2019
Posts: 4
By the way forgot to say it's a 1995 super duty f-450
Natdog is offline  
post #3 of 5 (permalink) Old 04-15-2019, 12:19 PM
Moderator
 
Sbluke55's Avatar
 
Join Date: Jun 2015
Location: Colorado
Posts: 7,855
Re: Ok at wits end been watching videos an reading for the last 4 days

So you need some way of monitoring the truck. Google "superduty diagnosis on the cheap". It shows you how to use forscan and torque pro to monitor and test your truck. You wont figure it out without seeing what the computer sees.

01 f-250, Standard
Rev tech 4" lift, 37" military wrangler Mt tires
KC diy 66, Full force 160/100 and custom tunes from PHP
Banks intercooler and full 4" exhaust, Diy S&B intake
Diy quad feed, Hydra, Isspro boost, pyro, and fuel pressure
3/0 battery cables with military style terminals
Sbluke55 is offline  
 
post #4 of 5 (permalink) Old 04-16-2019, 02:44 PM Thread Starter
PSN Newb
 
Natdog's Avatar
 
Join Date: Apr 2019
Posts: 4
Ya I'm not Sure but I think I might have figured it out I'll know for sure in a couple days hopefully but the #22 fuse for the pcm has no power going in or coming out so I'm hoping it's a bad wire
Natdog is offline  
post #5 of 5 (permalink) Old 04-19-2019, 12:25 PM Thread Starter
PSN Newb
 
Natdog's Avatar
 
Join Date: Apr 2019
Posts: 4
Ok figured it out hpop
Natdog is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
At my wits end - modded IDM and codes running issues Shaw 7.3L Power Stroke Technical Info 17 06-09-2010 04:19 AM
At wits end Warhippie 7.3L Power Stroke Technical Info 6 03-28-2010 11:02 PM
I'm at wits end with this truck... Mdub707 6.0L Power Stroke Technical Info 22 06-19-2009 05:42 PM
I am at my wits end dalpilot 6.0L Power Stroke - Aftermarket & Performance 18 06-22-2008 12:36 AM
Wits End lildevil02 General Questions & Discussion 16 11-01-2007 07:51 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome