Any idea on what this setup would make - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 07-22-2010, 04:36 AM Thread Starter
PSN Newb
 
Join Date: Jul 2010
Posts: 7
Any idea on what this setup would make

New here. But Im savin money right now gettin close to what I want to do. Truck is an 06 already has studs and an sct with innovative extreme race tune 4 inch dp with 4 inch straight pipe and an intake. Im wanting to get a powermax turbo, gogo stage 1 intake manifold, egr delete(might make one this weekend if I have time) and a moderate FICM tune from innovative. Im thinking maby 450ish with very little smoke. I may weld the relief ports on the injectors if I feel balsy. Whats everyone else think about this combo?
TDK8610 is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 07-22-2010, 05:10 AM
PSN Veteran
 
AllanB's Avatar
 
Join Date: Mar 2009
Location: Mississippi
Posts: 728
Re: Any idea on what this setup would make

I haven't had any experience in the area of welding the ports on the injectors. But I did read a thread on here where people suggested not to. To much heat and they warp. Then they are good for nothing. Like I said just read about it. Good Luck

The world is a dangerous place to live, not because of the people who are evil, but becase of the people who do nothing about it.
--Albert Einstein
AllanB is offline  
post #3 of 9 (permalink) Old 07-22-2010, 11:20 AM
The Unseen Mod
 
RescueF250's Avatar
 
Join Date: Jul 2007
Location: NOVA, Virginia
Posts: 4,126
Send a message via AIM to RescueF250
Re: Any idea on what this setup would make

I would not touch the injector unless you know what your doing, your going into the realm of what the injector builders do and if you mess it up you gonna be asking for trouble, that set-up should be good to 450 maybe a little more, but you will be lacking fuel up high.

03 Rescue is Dead

08 Rescue - No Limit Fab, MPD, Rescue Diesel, Barder Turbo, Fuel Lab, H&S products.
RescueF250 is offline  
 
post #4 of 9 (permalink) Old 07-22-2010, 01:54 PM
PSN Veteran
 
SamW's Avatar
 
Join Date: Dec 2008
Location: Fl
Posts: 772
Re: Any idea on what this setup would make


2006 F250 CCSB

6.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


thanks to FCDP and Innovative Diesel
SamW is offline  
post #5 of 9 (permalink) Old 07-23-2010, 02:41 AM
psn local
 
Join Date: May 2010
Location: houston,Texas
Posts: 775
Re: Any idea on what this setup would make

with the innovative tune they made up 420 hp but most get 380 plus the power max easily 420, the gogo intake no confirmed dyno # id say 25-35 depending how much boost your making. so yeah you should be around 450 or so. you ever considered headers form murff racing? the stock headers on 6.0 suck from what jason murff told me he said 30+ hp and quicker spool up and 150 degree drop in egts. and like every one else said dont mess with you injectors unless there being sent to a injector builder.
smokin6.0psd is offline  
post #6 of 9 (permalink) Old 07-23-2010, 02:50 AM Thread Starter
PSN Newb
 
Join Date: Jul 2010
Posts: 7
Re: Any idea on what this setup would make

Didn't even know anyone makes headers for a 6.0. Does anyone have videos I bet they sound nasty.
TDK8610 is offline  
post #7 of 9 (permalink) Old 07-23-2010, 03:23 AM
psn local
 
Join Date: May 2010
Location: houston,Texas
Posts: 775
Re: Any idea on what this setup would make

murff racing has some. my buddy up north has some but (not from murff racing) they do sound nasty. there's a vid on youtube the guy's account is hicktownmotorsports or type in 6.0 sled pull its a blue truck w/stack
smokin6.0psd is offline  
post #8 of 9 (permalink) Old 07-23-2010, 03:25 AM
psn local
 
Join Date: May 2010
Location: houston,Texas
Posts: 775
smokin6.0psd is offline  
post #9 of 9 (permalink) Old 08-04-2010, 05:00 AM
PSN Veteran
 
hypersnyper694788's Avatar
 
Join Date: Sep 2009
Posts: 536
Re: Any idea on what this setup would make

how much to headers run

06' F-250 CC SRW 4x4, 6" fabtech lift, bilstien 5100 shocks, 4" MBRP TB no cat, ARP studs, 2 JL audio 10" W0, 20x12 weld cheyenne 8's, 35x13.50x20 Mickey Thompson Baja ATZ


BNIB 6.0 head with all related hardware, straight from FORD. For Sale PM me offers
hypersnyper694788 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome