stock rods\valve spring\pushrods hp limit? - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 30 (permalink) Old 04-03-2010, 01:59 AM Thread Starter
PSN Local
 
Join Date: Aug 2009
Posts: 63
stock rods\valve spring\pushrods hp limit?

Whats the limit on stock parts like rods and valve springs? Who sells better valve springs?
Bigdeeezl is offline  
Sponsored Links
Advertisement
 
post #2 of 30 (permalink) Old 04-03-2010, 02:18 AM
PSN Veteran
 
Redneck6.0L's Avatar
 
Join Date: Mar 2008
Posts: 1,960
Re: stock rods\valve spring\pushrods hp limit?

rods nobody knows, everyone over 750hp put rods in to prevent holes in the block, i'm over 1k hp turn 4200rpm at the end of the track with 75psi boost and no valve issues, my valve train is stock

2006 F-350 crew cab dually 4X4
225cc injectors, CRD twin turbo's
Fueled by Gibson's

2003 F-350 crew cab
[email protected]


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Redneck6.0L is offline  
post #3 of 30 (permalink) Old 04-03-2010, 02:37 AM Thread Starter
PSN Local
 
Join Date: Aug 2009
Posts: 63
Re: stock rods\valve spring\pushrods hp limit?

I hope theyll hold 600ish going to run elite 275s and procharger.

Not set on elites or 275s
Bigdeeezl is offline  
 
post #4 of 30 (permalink) Old 04-03-2010, 03:25 AM
Captain Negativity!
 
PSDPlayer's Avatar
 
Join Date: Jul 2007
Location: Ft Lauderdale, FL
Posts: 3,109
Send a message via AIM to PSDPlayer
Re: stock rods\valve spring\pushrods hp limit?

What size procharger?

Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phone:954-275-6801 Leave me a message. I can't always answer.
05 CC LB DRW Lariat 4x2 Dropped 3/6.
PSDPlayer is offline  
post #5 of 30 (permalink) Old 04-03-2010, 03:34 AM
Captain Negativity!
 
PSDPlayer's Avatar
 
Join Date: Jul 2007
Location: Ft Lauderdale, FL
Posts: 3,109
Send a message via AIM to PSDPlayer
Re: stock rods\valve spring\pushrods hp limit?

Quote:
Originally Posted by Harohunter View Post
F1C or f1A
Go bigger. That's not even close to being large enough.

Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phone:954-275-6801 Leave me a message. I can't always answer.
05 CC LB DRW Lariat 4x2 Dropped 3/6.
PSDPlayer is offline  
post #6 of 30 (permalink) Old 04-04-2010, 04:19 AM
Its a wild ride...
 
shu873's Avatar
 
Join Date: Apr 2008
Location: Tipton, Iowa
Posts: 560
Re: stock rods\valve spring\pushrods hp limit?

Doug who are you quoting? Are Hunter and bigdeezl one in the same???

Kurt

2006 True Blue/Silver F250 Crew cab
Just the normal bolt ons...


Quote:
Originally Posted by !!!PainTrain!!! View Post
Rule number 1 in owning a 6.0: DON'T HALF ASS ANYTHING!
shu873 is offline  
post #7 of 30 (permalink) Old 04-04-2010, 03:51 PM
PSN Local
 
jrmmustang's Avatar
 
Join Date: May 2009
Posts: 83
Re: stock rods\valve spring\pushrods hp limit?

Bigdeeezl what procharger kit are you running or are you making your own?? I am looking at doing that same thing not as big just to make it run a little better

2003 F-350 Crew 4x4 205k 4" silverline turbo back CAI, Garret Stage One VGT, 165cc injectors, SCT ID's x-race x-street tow
jrmmustang is offline  
post #8 of 30 (permalink) Old 04-04-2010, 06:35 PM
Captain Negativity!
 
PSDPlayer's Avatar
 
Join Date: Jul 2007
Location: Ft Lauderdale, FL
Posts: 3,109
Send a message via AIM to PSDPlayer
Re: stock rods\valve spring\pushrods hp limit?

I'm quoting anyone that puts an F1 or F2 on there expecting it to put out enough.

Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Phone:954-275-6801 Leave me a message. I can't always answer.
05 CC LB DRW Lariat 4x2 Dropped 3/6.
PSDPlayer is offline  
post #9 of 30 (permalink) Old 04-05-2010, 04:01 AM
Sponsor
 
jwarren's Avatar
 
Join Date: Mar 2009
Posts: 695
Re: stock rods\valve spring\pushrods hp limit?

I think Eric from idp was saying he did over 800 on stock rods with spray.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
jwarren is offline  
post #10 of 30 (permalink) Old 04-09-2010, 06:25 AM
PSN Veteran
 
CanadianRedneck's Avatar
 
Join Date: May 2008
Location: Fort McMurray, Alberta, CANADA
Posts: 583
Re: stock rods\valve spring\pushrods hp limit?

Quote:
Originally Posted by jwarren View Post
I think Eric from idp was saying he did over 800 on stock rods with spray.
It did briefly live with stock rods over 800hp but then bent all the rods when pushed to the 1k mark

2005 F350 Crewcab 4x4 6.0L
64mm turbo, NADP race tranny, tuning by Eric at Innovative Diesel
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2004 F250 4x4 6.0L
Work in progress.......
EDE heads, cam, pistons, hybrid injectors, Hypermax rods,
2 really big turbos and a whole bunch of other crap to come.....
Tuning by Innovative of course!
CanadianRedneck is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome