My dad's truck, am I missing anything? - PowerStrokeNation : Ford Powerstroke Diesel Forum
 3Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 18 (permalink) Old 03-21-2017, 05:05 AM Thread Starter
PSN Newb
 
JustSayWhen's Avatar
 
Join Date: Mar 2017
Location: San Antonio
Posts: 15
My dad's truck, am I missing anything?

My dad lives in a travel trailer. He bought an early 03 6.0 Supercab 4x4

HPOP had no pressure, oil coolant was mixed and the turbo was cracked. Oh, the x1,2,3 FICM connectors were zip tied on.

This is what was already there, what I have done and what I think still needs to be done.

California registration so emissions upgraded.

Preexisting:
Aftermarket CAC and intercooler
FICM Upgrade.
Aluminum radiator.

What's been done:

https://www.scangauge.com/products/scangauge-ii/

GARRETT NEW STOCK TURBO FOR FORD POWERSTROKE 2003 6.0L
Garrett New Stock Turbo for Ford Powerstroke 2003 6.0L

SINISTER DIESEL COMPLETE SOLUTION W/ EGR COOLER (ROUND), 18MM FORD GASKETS, '03 UPDATE KIT
SD-CS-6.0-EGRC-RC-18-FG-UK-03
Sinister Diesel Complete Solution w/ EGR Cooler (Round), 18mm Ford Gaskets, '03 Update Kit

HPOP (OEM)
ICP Sensor (OEM)
OEM IPR (OEM)
Set of (8) Ball Tube and Oring Sets with tool

3C3Z-12B637-AB
FORD 6.0L ENGINE WIRING HARNESS ASSEMBLY KIT

What I'm doing next:

https://www.iprresearch.com/IPR-High...-Manifold.html

https://www.bulletproofdiesel.com/pr...heavy-duty.htm

https://www.bulletproofdiesel.com/Bu...ch_upgrade.htm

https://www.bulletproofdiesel.com/Bu...ch_upgrade.htm

https://www.fumotooildrainvalve.com/...16mm-1-5.html?

Convert to ELC.

Future upgrade is the air intake. Looking for advice on that.

Am I missing anything here?
JustSayWhen is offline  
Sponsored Links
Advertisement
 
post #2 of 18 (permalink) Old 03-21-2017, 05:48 AM Thread Starter
PSN Newb
 
JustSayWhen's Avatar
 
Join Date: Mar 2017
Location: San Antonio
Posts: 15
JustSayWhen is offline  
post #3 of 18 (permalink) Old 03-23-2017, 03:13 PM
PSN Newb
 
Join Date: Feb 2015
Posts: 12
Re: My dad's truck, am I missing anything?

The one problem that I see is that the IPR coolant filter manifold plugs into the oil cooler cover port. That port won't be there because the oil cooler cover will be replaced with the BPD air-to-oil cooler base plate. You can use the IPR coolant filter itself with no problems. It's just not going to be connected through the manifold. So... you save a little cash.
JustSayWhen likes this.
m3a1ht is offline  
 
post #4 of 18 (permalink) Old 03-28-2017, 07:33 PM Thread Starter
PSN Newb
 
JustSayWhen's Avatar
 
Join Date: Mar 2017
Location: San Antonio
Posts: 15
Re: My dad's truck, am I missing anything?

Valves came in yesterday. Wow. I haven't seen quality from Japan in years. Worth the $25 each. IPR High flow coolant filter came in today. Looks like it was kicked around the shop floor with the edge nicks and face scratches, otherwise I'm excited for it. No vendor stickers. Guess I won't advertise for IPR on my back window.

m3a1ht you're right. I had already placed the order. Wanna buy an IPR manifold adapter? Got one for sale.
JustSayWhen is offline  
post #5 of 18 (permalink) Old 03-31-2017, 03:27 AM
PSN Newb
 
Join Date: Feb 2015
Posts: 12
Re: My dad's truck, am I missing anything?

Quote:
Originally Posted by JustSayWhen View Post
...m3a1ht you're right. I had already placed the order. Wanna buy an IPR manifold adapter? Got one for sale.
Ya know... that manifold is cooler than cool, but I have a BPD oil cooler relocation. ...so I have the same BPD oil cooler base plate that you will. No manifold for us!

You will definitely be able to get your money out of that, though. Post it here and on the ORG.

2004 F550 CC Lariat
m3a1ht is offline  
post #6 of 18 (permalink) Old 03-31-2017, 03:35 AM Thread Starter
PSN Newb
 
JustSayWhen's Avatar
 
Join Date: Mar 2017
Location: San Antonio
Posts: 15
Re: My dad's truck, am I missing anything?

It is super cool. I'll sell it for 50 cents on the dollar. The org? I on mobile I'll find the marketplace
JustSayWhen is offline  
post #7 of 18 (permalink) Old 04-12-2017, 07:22 PM Thread Starter
PSN Newb
 
JustSayWhen's Avatar
 
Join Date: Mar 2017
Location: San Antonio
Posts: 15
Re: My dad's truck, am I missing anything?

Well everything listed is in. Broken injector connector driver side. Rear one, waiting in FedEx. Overnight part ap0040 from XDP

Hereso the bad news, rear two injector connector fell in on passenger side. Pulling inner fender now.

Everything together except what's out of the way to pull both value covers.

FML SMH. not an easy Shade tree job for a 6.0 Virgin. Hoping tomorrow I'll fire it up. Praying for no leaks. 124k miles and it's never had a drip. Hope it stays that way.

Nobody can agree or disagree with you if you don't say it.
JustSayWhen is offline  
post #8 of 18 (permalink) Old 04-13-2017, 12:39 PM
PSN Veteran
 
410customs's Avatar
 
Join Date: Aug 2016
Location: Idaho panhandle
Posts: 3,284
Re: My dad's truck, am I missing anything?

Quote:
FML SMH
I'm usually pretty good at these and can sort them out, but this one I dunno


1997 CCFB 7.3, ZF5, 4x4, 4.10, baby swamps, TS6, E99 spyder, RiffRaff pipes, 6.0 FMIC, RSK, 315 toyo at
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2001 Excursion 7.3, auto, 4x4, 3.73, collecting parts for suspension lift
2000 E350 7.3, auto 2wd, 3.73, toy hauler camper conversion...researching 4x conversion
21.9 liter family
410customs is offline  
post #9 of 18 (permalink) Old 04-13-2017, 01:11 PM
Moderator
 
Sbluke55's Avatar
 
Join Date: Jun 2015
Location: Colorado
Posts: 7,867
Re: My dad's truck, am I missing anything?

F*ck my life
Shake my head.

01 f-250, Standard
Rev tech 4" lift, 37" military wrangler Mt tires
KC diy 66, Full force 160/100 and custom tunes from PHP
Banks intercooler and full 4" exhaust, Diy S&B intake
Diy quad feed, Hydra, Isspro boost, pyro, and fuel pressure
3/0 battery cables with military style terminals
Sbluke55 is offline  
post #10 of 18 (permalink) Old 04-13-2017, 01:17 PM
EA - Eggfarts Anonymous!
 
Turd-250's Avatar
 
Join Date: May 2013
Location: Red Dirt Country
Posts: 18,500
Re: My dad's truck, am I missing anything?

Lol I thought that one meant for my lose lol


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


"Farts are like a good bourbon, add a small touch of water to bring out the excellence."
Turd-250 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome