2003 intake manifold vs 2005 intake manifold - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 03-17-2014, 11:38 AM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
2003 intake manifold vs 2005 intake manifold

Hey guys is there any advantage of using a stock 2005 intake vs my stock 2003 intake manifold on my truck? I have a 2003 and it's all tore start and was wondering if I should get a 2005 intake manifold for it or not. Let me know u guys opinions.

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 03-17-2014, 11:43 AM
JGman141
 
Jgman141's Avatar
 
Join Date: Oct 2012
Location: Ohio
Posts: 859
Re: 2003 intake manifold vs 2005 intake manifold

Nope, there's is very little difference between the two. If you put a ported one on then yiu could tell a big difference.

2004 6.0 ccsb Warren 430/150 hybrids, Warren Comp Trans, Warren Dual Hpop, Billet S475 w/race cover, Marty's A1000 Fuel System, Colt Stage 2, and all the other supporting stuff
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Jgman141 is offline  
post #3 of 9 (permalink) Old 03-17-2014, 01:11 PM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
Re: 2003 intake manifold vs 2005 intake manifold

Ya I right now don't have the extra cash to spend on a ported one. Only thing I thought may be easier not having the back piece that goes across engine.

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
 
post #4 of 9 (permalink) Old 03-17-2014, 01:34 PM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
Re: 2003 intake manifold vs 2005 intake manifold

Also

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
post #5 of 9 (permalink) Old 03-17-2014, 01:34 PM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
Re: 2003 intake manifold vs 2005 intake manifold

Also is there any way to remove or guy the throttle plate in the 2003 intake?

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
post #6 of 9 (permalink) Old 03-17-2014, 06:55 PM
PSN Veteran
 
Join Date: Dec 2010
Posts: 2,086
Re: 2003 intake manifold vs 2005 intake manifold

They are not directly interchangable if you are keeping the EGR intact. Have you looked to see if you have a throttle plate? You may have the riser and just no plate like my 2003. One advantage to the newer intake is you can remove it without removing the turbo, the downside is easier to warp and no "balance tube" for air flow.
lenzhotrod is offline  
post #7 of 9 (permalink) Old 03-17-2014, 09:40 PM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
Re: 2003 intake manifold vs 2005 intake manifold

Yeah I'm just putting stock one back on it. The throttle plate is getting pulled off cause putting a aftermarket banks elbow on it.

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
post #8 of 9 (permalink) Old 03-18-2014, 01:50 AM
PSN Veteran
 
Join Date: Dec 2010
Posts: 2,086
Re: 2003 intake manifold vs 2005 intake manifold

Mine is an 03 and I have the Banks technicooler and still had to use the throttle plate. Maybe your Banks kit is for an 05 or later.
lenzhotrod is offline  
post #9 of 9 (permalink) Old 03-18-2014, 09:46 AM Thread Starter
PSN Veteran
 
Join Date: Oct 2011
Posts: 807
Re: 2003 intake manifold vs 2005 intake manifold

Yeah my banks kit is for a 05 and later

2008 f350 crew cab short bed king ranch. 6.4 auto 4x4. Sct livewire tuner afe stage 2 intake and 4 inch strait pipe dpf & egr delete, intake elbow, banks intercooler, cold side intercooler pipe that's not crushed
Bignbadbelair is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome