Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold? - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 39 (permalink) Old 06-15-2012, 11:21 AM Thread Starter
PSN Local
 
Join Date: Feb 2012
Posts: 165
Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

Soon i will be doing my studs, gogo ported intake manifold with egr delete, oil cooler. lots of the ford factory upgrades, and the steed speed exhaust manifolds/up pipe. GoGo advertises their stage 1 manifold to flow an extra 55% of air to the rear cylinders. And Steed speed says on a bone stock truck they picked up an extra 95 hp and 245lb ft of tq on a bolt on set of their manifolds and 2.5 inch up pipes. More air in=More air out... With the heaviest fueling possible out of stock injectors; what does everyone think would be the biggest non vgt turbo i could spool, but still keep when i do decide to do injectors. Not trying to buy two different turbos. Im not worried about lag as i used to drive a 12 valve cummins with an 80mm compressor wheel on it. 64/66 mm turbo possibly?

Opinions?

Go-Go Diesel 6LSTG1 Stage 1 Intake Manifold w/ EGR Delete 6.0L Powerstroke

Steed Speed - Ford 6.0-6.4 powerstroke performance headers

Current: 06 F-250 Fummins, 12 valve, zf6, 370's, full cuts, o ringed, studded, pinned hx55, common rail intercooler, short shifter, lowered on 35's
Hazinhtown is offline  
Sponsored Links
Advertisement
 
post #2 of 39 (permalink) Old 06-15-2012, 11:26 AM
i like to party
 
pizza pig's Avatar
 
Join Date: Aug 2010
Posts: 1,415
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

64mm compressor inducer is going to be a sweet turbo with stock sticks and that setup. make good clean reliable power. A 66 needs more fuel.
pizza pig is offline  
post #3 of 39 (permalink) Old 06-15-2012, 12:05 PM Thread Starter
PSN Local
 
Join Date: Feb 2012
Posts: 165
Any idea what hp that would be sitting close to?

Current: 06 F-250 Fummins, 12 valve, zf6, 370's, full cuts, o ringed, studded, pinned hx55, common rail intercooler, short shifter, lowered on 35's
Hazinhtown is offline  
 
post #4 of 39 (permalink) Old 06-15-2012, 12:15 PM
Gettin there
 
06_WhiteBull's Avatar
 
Join Date: Jun 2012
Posts: 205
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

I'm a newb and just starting to explore turbo's, but how long before you upgraded your sticks? I wonder if a 66mm with that setup and tuning would clean up 175/75's?
06_WhiteBull is offline  
post #5 of 39 (permalink) Old 06-15-2012, 12:20 PM
Gettin there
 
06_WhiteBull's Avatar
 
Join Date: Jun 2012
Posts: 205
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

[QUOTE=Hazinhtown;1856400] And Steed speed says on a bone stock truck they picked up an extra 95 hp and 245lb ft of tq on a bolt on set of their manifolds and 2.5 inch up pipes. More air in=More air out...

Damn, I thought I was done looking at my build parts list. This looks sweet, I wonder if it really stands behind the claim. If so......gotta start workin some OT again.
06_WhiteBull is offline  
post #6 of 39 (permalink) Old 06-15-2012, 12:24 PM Thread Starter
PSN Local
 
Join Date: Feb 2012
Posts: 165
FYI... You must buy aftermarket up pipes for these manifolds... Elite diesel has them for an additional 1,000. Yikes. But I'm now one of 25 powerstroke owners with their manifolds. Kind of neat.

Current: 06 F-250 Fummins, 12 valve, zf6, 370's, full cuts, o ringed, studded, pinned hx55, common rail intercooler, short shifter, lowered on 35's
Hazinhtown is offline  
post #7 of 39 (permalink) Old 06-15-2012, 01:00 PM
Gettin there
 
06_WhiteBull's Avatar
 
Join Date: Jun 2012
Posts: 205
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

1000 for pipes AND A 1000 for manifolds?
06_WhiteBull is offline  
post #8 of 39 (permalink) Old 06-15-2012, 01:10 PM
PSN Veteran
 
strokin6L's Avatar
 
Join Date: Dec 2009
Location: springville, NY
Posts: 1,963
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

[quote=06_WhiteBull;1856422]
Quote:
Originally Posted by Hazinhtown View Post
And Steed speed says on a bone stock truck they picked up an extra 95 hp and 245lb ft of tq on a bolt on set of their manifolds and 2.5 inch up pipes. More air in=More air out...

Damn, I thought I was done looking at my build parts list. This looks sweet, I wonder if it really stands behind the claim. If so......gotta start workin some OT again.
those number were from a 6.4 that was tested....not a 6L. I do remember that Speed would expect the 6L to have at least half those numbers.

2004 F-350 SC 4x4 6L....little bit of this...little bit of that
strokin6L is offline  
post #9 of 39 (permalink) Old 06-15-2012, 02:08 PM
Gettin there
 
06_WhiteBull's Avatar
 
Join Date: Jun 2012
Posts: 205
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

AHHHHH.....$2k for @50-65 horse, not worth the OT. Still interested in it though. I'll call them and talk about #'s.
06_WhiteBull is offline  
post #10 of 39 (permalink) Old 06-15-2012, 02:12 PM
PSN Local
 
Join Date: Dec 2011
Location: grand haven MI
Posts: 113
Re: Largest non vgt turbo with ported gogo intake and steed speed exhaust manifold?

interested to see how this setup runs subscribed
range91 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome