Ford Power Stroke Nation banner

lift

597 views 2 replies 3 participants last post by  OBSWIZ 
#1 ·
i have a 2004 f250 and i already put a leveling kit on the front. i want a little more height on her. should i get a 2.5inch block in the back or will that cause problems with my drive shaft and shocks?? if anyone has a picture of the setup im thinking about let me know!
 
#2 ·
I had the same as you. I then went with the 6in lift still with stock shocks in the rear so that shouldnt be a prob. On the other hand the truck did shake alittle starting off i then threw on a block to lower it and now no prob but i would say you should be fine with a block in the rear leaf. Honestly i would just go with a 4in lift but i love my 6in. Hope this helps.
 
#3 ·
If you get a complete kit it will come with new blocks, U bolts, adj track bar etc..all needed..I would suggest a hanger kit 2-3" for the best ride quality..we have them..Pm me if I can help.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top