HELP turbo wont come off?? - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 13 (permalink) Old 04-21-2011, 12:30 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 384
HELP turbo wont come off??

workin on a 05 6.0 got all 3 bolts out for ped all v clamps out how do i remove the oil tube i belive it is the only thing left help please??????/

BDP,238S/100s,live tuned by john @ BDP,stealth hpop,comp 910s,studs,D66 wastegated, idm mod, boost fooler,3 gauge pillar,BDP dual pump fuel kit,99 IC,BTS,single stage NX kit (655 hp) 12.649 @ 110 mph.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
CT SMOKER is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 04-21-2011, 12:31 AM
PSN Veteran
 
07strokerftw's Avatar
 
Join Date: May 2010
Location: Smithfield, NC
Posts: 1,525
Re: HELP turbo wont come off??

It can be a bitch to get off that tube.. keep working with it but be careful, and again make sure you have unbolted everything

2007 F250 ccsb Lariat
33" Nitto Terra Grapplers on stocks, SCT x3 with custom extreme tunes from IDP, Autometer gauges, zoodad air mod, "2003" turbo, carriage works billet grill layover, HID 6000k, headstuds/egr delete, 6.4 banjo fuel bolt upgrade, 4" turbo back to 7" single stack
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
07strokerftw is offline  
post #3 of 13 (permalink) Old 04-21-2011, 12:35 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 384
Re: HELP turbo wont come off??

so theres a lil tab on the bottom of the tube down on the motor u just pry it out i take it

BDP,238S/100s,live tuned by john @ BDP,stealth hpop,comp 910s,studs,D66 wastegated, idm mod, boost fooler,3 gauge pillar,BDP dual pump fuel kit,99 IC,BTS,single stage NX kit (655 hp) 12.649 @ 110 mph.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
CT SMOKER is offline  
 
post #4 of 13 (permalink) Old 04-21-2011, 12:36 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 384
Re: HELP turbo wont come off??

theres only three bolts on ped holding turbo to motor

BDP,238S/100s,live tuned by john @ BDP,stealth hpop,comp 910s,studs,D66 wastegated, idm mod, boost fooler,3 gauge pillar,BDP dual pump fuel kit,99 IC,BTS,single stage NX kit (655 hp) 12.649 @ 110 mph.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
CT SMOKER is offline  
post #5 of 13 (permalink) Old 04-21-2011, 12:44 AM
<-•DEISEL CRAFT•
 
coalroller3x's Avatar
 
Join Date: Feb 2009
Location: Around Tulsa OK
Posts: 565
Re: HELP turbo wont come off??

3 bolts turbo to pedestal 4 bolts pedestal to engine.
3 bolts oil feed tube. Oil drain tube is held in place metal tap

05 f250
Cass 190cc injectors with 100 over nozzles
tsd fuel sump, fuel lab=Custom, sinister reg return, MPD headers/up pipes, arp studs,JGS wastegate, egr delete, banks CAC, ram air and techni cooler,S&B cold air,TurboNetics dual ball bearing 64/65 .83AR, twisted diesel trans stage 2,phantom 2=egt,trans,boost,fuel psi
coalroller3x is offline  
post #6 of 13 (permalink) Old 04-21-2011, 01:00 AM Thread Starter
PSN Local
 
Join Date: Jan 2010
Posts: 384
Re: HELP turbo wont come off??

can i get a good link to get turbo off

BDP,238S/100s,live tuned by john @ BDP,stealth hpop,comp 910s,studs,D66 wastegated, idm mod, boost fooler,3 gauge pillar,BDP dual pump fuel kit,99 IC,BTS,single stage NX kit (655 hp) 12.649 @ 110 mph.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
CT SMOKER is offline  
post #7 of 13 (permalink) Old 04-21-2011, 01:12 AM
PSN Local
 
suprdzlduty's Avatar
 
Join Date: Aug 2008
Location: Prospect, Oh
Posts: 196
Re: HELP turbo wont come off??

make sure the downpipe is off the turbo...use a small pry bar to push up on the turbo some...its probably hung up a little on the uppipes...its pretty easy. there is a dowel pin that sits in a notch on the back of the pedistal so you'll have to wiggle it out of there.

04 CCSB Lariat, 4x4, studded & deleted(Elite), Garrett stage 1(DI), Innovative tunes, DS coolant filter, FS2500, Banks intercooled, 17x9 MT classicII's, Nittos, trans rebuilt by me, B&M shift kit, billet converter...sold

04 F450 RC studded & deleted(FCDP), alum. wheels, pulls the gn.

05 build in progress...
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
suprdzlduty is offline  
post #8 of 13 (permalink) Old 04-21-2011, 01:14 AM
<-•DEISEL CRAFT•
 
coalroller3x's Avatar
 
Join Date: Feb 2009
Location: Around Tulsa OK
Posts: 565
Re: HELP turbo wont come off??

It s pretty easy pull the turbo mounting bolts (3)
Remove oil drain tube pick the turbo up off of the dowls
.
If you half to stick a pry bar in the cac tube outlet and pry the turbo up.

Once the turbo is off the oil drain tube should be pretty easy to remove.

05 f250
Cass 190cc injectors with 100 over nozzles
tsd fuel sump, fuel lab=Custom, sinister reg return, MPD headers/up pipes, arp studs,JGS wastegate, egr delete, banks CAC, ram air and techni cooler,S&B cold air,TurboNetics dual ball bearing 64/65 .83AR, twisted diesel trans stage 2,phantom 2=egt,trans,boost,fuel psi
coalroller3x is offline  
post #9 of 13 (permalink) Old 04-21-2011, 01:16 AM
<-•DEISEL CRAFT•
 
coalroller3x's Avatar
 
Join Date: Feb 2009
Location: Around Tulsa OK
Posts: 565
Re: HELP turbo wont come off??

O if you half to wedge the up pipes out of the turbine housing be easy tho

05 f250
Cass 190cc injectors with 100 over nozzles
tsd fuel sump, fuel lab=Custom, sinister reg return, MPD headers/up pipes, arp studs,JGS wastegate, egr delete, banks CAC, ram air and techni cooler,S&B cold air,TurboNetics dual ball bearing 64/65 .83AR, twisted diesel trans stage 2,phantom 2=egt,trans,boost,fuel psi
coalroller3x is offline  
post #10 of 13 (permalink) Old 04-21-2011, 01:31 AM
7.3 Enthusiast
 
91turbogsx's Avatar
 
Join Date: Aug 2008
Location: Templeton MA
Posts: 682
Re: HELP turbo wont come off??

I just went through this Saturday. Once I got to the point your at now I just used a prybar and it came right off.

Just be careful on reinstallation. I swore I had the up pipe flange seated on the turbo and had the clamp tight yet had a major exhaust leak there. So ended up having to loosen the uppipes to get it perfect.

'02 F-350 4x4 Black RC/LB
4" Lift with 35's. OUO Traction Blocks
20x10 Fuel Throttle's
Lots of deleted parts...
Custom fuel system w/ Strictly Diesel RR
Dieselsite Adrenaline HPOP
DI Up-Pipes
DP-Tuned
and more...
91turbogsx is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome