06 6.0 no start - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 6 (permalink) Old 05-19-2019, 05:18 PM Thread Starter
PSN Newb
 
Join Date: May 2019
Posts: 3
06 6.0 no start

Had a leak in tge hp oil system wnt in replaced dummy plgs and standpipes to updated changed ipr valve, stc fitting to updated, resealed all injectors and cups.
Afterwards i pressure tested with air and its completely sealed. I let it sit pressurized for 5 hrs no change still no start. Ipr and icp is at 84.7% and 324 psi.
Could this be a bad hpop or some electrical issue? I checked fuses seem good. At a loss
Tonyl is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-19-2019, 05:37 PM
"resident smarty pants"
 
Join Date: Apr 2008
Posts: 3,831
Re: 06 6.0 no start

Sometimes you have to crank quite a bit to get all the air out. Cranking w/ the FICM relay removed is best because excess cranking and low battery voltage can damage the FICM.

Mark
06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax
bismic1 is offline  
post #3 of 6 (permalink) Old 05-19-2019, 06:59 PM Thread Starter
PSN Newb
 
Join Date: May 2019
Posts: 3
I am gonna try soon as i am on a charge right now with these batterys
Tonyl is offline  
 
post #4 of 6 (permalink) Old 05-19-2019, 08:33 PM Thread Starter
PSN Newb
 
Join Date: May 2019
Posts: 3
Got it started. However after running for about 20 min got a 0261 code injector 1
And shortly after got a 2290 code any ideas?
Tonyl is offline  
post #5 of 6 (permalink) Old 05-19-2019, 11:18 PM
"resident smarty pants"
 
Join Date: Apr 2008
Posts: 3,831
Re: 06 6.0 no start

P0261 is an electrical code, so verify the injector connector is properly connected.

Sometimes you need some "spirited" accelerations to get the air out. Try 5-10 good accelerations (doesn't have to be "foot-to-the-floor") after checking the injector connector.

Mark
06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax
bismic1 is offline  
post #6 of 6 (permalink) Old 05-20-2019, 05:02 PM
CAT lover
 
Robertl211's Avatar
 
Join Date: Feb 2014
Location: Cape Cod, MA
Posts: 576
Re: 06 6.0 no start

I did a whole bunch of work to my buddies truck including injectors, LPOP, front cover, STC fitting, stand pipes and dummies, oil cooler, turbo, egr delete, and some other things i cant think of right now. Took about 60 seconds cranking to get it to fire up and then had the same issue, one injector code and rough running with smoke. Mine was a contribution and cyl misfire codes. either way, it took an honest 30 min of driving it like I stole it to work the air out of the injector but when it finally cleared up its like a brand new truck now.

I was never a believer of the "it takes up to 30 min to get the air out of the injection system" and the "drive it like you stole it to get the air out" but I am now.

Plus driving it like you stole it keeps the veins clean on the VGT

96 F250 RCFB 4x4 7.3
96 f350 CCLB Dually ZF5, custom flatbed, Gregio Medio Lamborghini paint, 3" dp 4" MBRP exhaust
95 F250 RCLB 7.3 4x4 conversion with 5" Sky RSK, D60 front, 18" American Racing, 35" Nittos, DIY SD intercooler, Melling LPOP, DIY 6637, Baby Swamps with TS6 and Swamps tunes, boost pyro trans

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

05 F350 RCLB Dually SOLD
Robertl211 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Crank hard start /no start /long crank start-not covered by sticky Volkskid 7.3L Power Stroke Technical Info 5 02-07-2018 03:39 AM
Odd start, stall, no start, start situation Weatherlite 6.0L Power Stroke Technical Info 6 08-27-2016 12:46 PM
No start tach no move and no wait to start light kram 7.3L Power Stroke Technical Info 5 12-26-2013 07:42 PM
'03 no codes, no oil press. no start, no idea jakejamie 6.0L Power Stroke Technical Info 8 01-05-2013 05:23 AM
no start started fine then died and no start or wait to start jrf350 1994-1997 Power Stroke Technical Info 10 11-05-2011 01:22 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome