Pressure and oil in degas bottle - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 04-08-2019, 12:42 PM Thread Starter
PSN Veteran
 
Scherf's Avatar
 
Join Date: Sep 2015
Location: Richmond, KY
Posts: 543
Garage
Pressure and oil in degas bottle

05 6.0 no studs, egr deleted

Pressure is getting into the degas bottle with no loss of coolant, what are y’alls thoughts?

It also takes a while to get to operating temp and stumbles when you first get her going from cold, after the temp gets to about 100 degrees stumbling stops.

New injectors and 278111 on the clock


Sent from my iPhone using Tapatalk

2004 F-250 Lariat 6.0L, crew cab, 2006 motor swap, white w/ gray interior, SCT X4, 4'' down pipe with 5'' to a stack, 325/65-18 nitto terra grapplers, air rad intake, egr delete, studded and deleted, FASS System ([email protected]) with sump, 190/100% Swamps Diesel Injectors, atlas 80 PHP FICM, RCD rods, DDPM lifters, Turbo Lab of America turbo.
Scherf is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 04-08-2019, 01:00 PM Thread Starter
PSN Veteran
 
Scherf's Avatar
 
Join Date: Sep 2015
Location: Richmond, KY
Posts: 543
Garage
Re: Pressure and oil in degas bottle

Also did a exhaust gas test from the degas bottle and it came back negative.


Sent from my iPhone using Tapatalk

2004 F-250 Lariat 6.0L, crew cab, 2006 motor swap, white w/ gray interior, SCT X4, 4'' down pipe with 5'' to a stack, 325/65-18 nitto terra grapplers, air rad intake, egr delete, studded and deleted, FASS System ([email protected]) with sump, 190/100% Swamps Diesel Injectors, atlas 80 PHP FICM, RCD rods, DDPM lifters, Turbo Lab of America turbo.
Scherf is offline  
post #3 of 9 (permalink) Old 04-08-2019, 01:11 PM Thread Starter
PSN Veteran
 
Scherf's Avatar
 
Join Date: Sep 2015
Location: Richmond, KY
Posts: 543
Garage
Re: Pressure and oil in degas bottle

Diesel fuel in the coolant..... injector cups it appears to be


Sent from my iPhone using Tapatalk

2004 F-250 Lariat 6.0L, crew cab, 2006 motor swap, white w/ gray interior, SCT X4, 4'' down pipe with 5'' to a stack, 325/65-18 nitto terra grapplers, air rad intake, egr delete, studded and deleted, FASS System ([email protected]) with sump, 190/100% Swamps Diesel Injectors, atlas 80 PHP FICM, RCD rods, DDPM lifters, Turbo Lab of America turbo.
Scherf is offline  
 
post #4 of 9 (permalink) Old 04-08-2019, 03:30 PM
PSN Veteran
 
matthewd11's Avatar
 
Join Date: Nov 2007
Location: Rhode Island
Posts: 4,607
Fuel in the coolant is more likely to be a cracked head. BPD makes a repair kit. But good luck. And you probably have a blown head gasket with the mileage on the original bolts

07 CCSB 4x4 Lariat FX4 Bronze Metallic/Sage
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
matthewd11 is offline  
post #5 of 9 (permalink) Old 04-08-2019, 04:23 PM
"resident smarty pants"
 
Join Date: Apr 2008
Posts: 3,828
Re: Pressure and oil in degas bottle

Quote:
Originally Posted by matthewd11 View Post
Fuel in the coolant is more likely to be a cracked head. BPD makes a repair kit. But good luck. And you probably have a blown head gasket with the mileage on the original bolts
+1!!

It isn't the cups on a 6.0L.

Typically the crack is at the #3, #5, #4, or #6 cylinders (by the injector hold down bolt holes).

Mark
06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax

Last edited by bismic1; 04-08-2019 at 08:03 PM.
bismic1 is online now  
post #6 of 9 (permalink) Old 04-08-2019, 09:27 PM Thread Starter
PSN Veteran
 
Scherf's Avatar
 
Join Date: Sep 2015
Location: Richmond, KY
Posts: 543
Garage
Re: Pressure and oil in degas bottle

Ya I am figuring it is..... this is a customers truck and I have an allowance of 1k for work.... soooo it’s not gonna get done lmfao!!!!


Sent from my iPhone using Tapatalk

2004 F-250 Lariat 6.0L, crew cab, 2006 motor swap, white w/ gray interior, SCT X4, 4'' down pipe with 5'' to a stack, 325/65-18 nitto terra grapplers, air rad intake, egr delete, studded and deleted, FASS System ([email protected]) with sump, 190/100% Swamps Diesel Injectors, atlas 80 PHP FICM, RCD rods, DDPM lifters, Turbo Lab of America turbo.
Scherf is offline  
post #7 of 9 (permalink) Old 04-08-2019, 09:40 PM Thread Starter
PSN Veteran
 
Scherf's Avatar
 
Join Date: Sep 2015
Location: Richmond, KY
Posts: 543
Garage
Re: Pressure and oil in degas bottle

Quote:
Originally Posted by bismic1 View Post
+1!!

It isn't the cups on a 6.0L.

Typically the crack is at the #3, #5, #4, or #6 cylinders (by the injector hold down bolt holes).


Bismic1, how prominent are the cracks by the hold downs? This is the first time I have ran into the issue of diesel fuel in the coolant.


Sent from my iPhone using Tapatalk

2004 F-250 Lariat 6.0L, crew cab, 2006 motor swap, white w/ gray interior, SCT X4, 4'' down pipe with 5'' to a stack, 325/65-18 nitto terra grapplers, air rad intake, egr delete, studded and deleted, FASS System ([email protected]) with sump, 190/100% Swamps Diesel Injectors, atlas 80 PHP FICM, RCD rods, DDPM lifters, Turbo Lab of America turbo.
Scherf is offline  
post #8 of 9 (permalink) Old 04-08-2019, 10:25 PM
PSN Veteran
 
matthewd11's Avatar
 
Join Date: Nov 2007
Location: Rhode Island
Posts: 4,607
The cracks I have seen are just above The injector cup

07 CCSB 4x4 Lariat FX4 Bronze Metallic/Sage
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
matthewd11 is offline  
post #9 of 9 (permalink) Old 04-08-2019, 10:48 PM
"resident smarty pants"
 
Join Date: Apr 2008
Posts: 3,828
Re: Pressure and oil in degas bottle

Unfortunately it isn't "rare". TSB 08-23-8 (primarily indicates a crack in the head)

To detect where the cracked head is when you have fuel in the coolant:
You need to put dye in the COOLING system and run engine for a few minutes to allow dye to mix with coolant. Use a good degas cap so system will build pressure. When turning engine off, cooling system pressure will cause coolant to bleed into injector bore on head that is cracked, you will be able to identify (with injectors removed) which head is cracked with black light. Fuel also shows up a light blue with blacklight, but you will be able to differentiate between fuel and dye in coolant.


https://www.accuratediesel.com/shop/279.html

DTR stated that the passenger side is the most common, but I would say it can be on either side.

BulletProofDiesel sells a repair method also.

https://www.bulletproofdiesel.com/BP...epair-tool.htm

https://www.google.com/search?q=BPD+...TF-8#kpvalbx=1

Mark
06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax
bismic1 is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
A More Durable Degas: Mishimoto’s 6.0L Aluminum Degas Bottle R&D Mishimoto 6.0L Power Stroke - Aftermarket & Performance 44 11-30-2016 05:36 PM
Oil in coolant degas bottle Wholigan 7.3L Power Stroke Technical Info 2 03-06-2014 10:11 PM
oil in degas bottle nick0360 6.0L Power Stroke Technical Info 3 03-22-2011 08:12 PM
oil in degas bottle? FamExc 6.0L Power Stroke Technical Info 8 03-20-2010 10:11 PM
Oil or Bar's Leak In Degas Bottle stroker99 7.3L Power Stroke Technical Info 6 10-29-2008 03:26 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome