Ford Power Stroke Nation banner

SNOW STAGE 2 INSTALL QUESTION

1K views 8 replies 4 participants last post by  1999F350 
#1 ·
IM INSTALLING A STAGE 2 SYSTEM ON A 2005 F350 6.0 EVERYTHING IS HOOKED UP AND CONECTED. THE PROBLEM IM HAVING IS THAT WHEN I TURN THE ARM SWITCH ON THE PUMP ACTIVATES. I HAVE THE SETTINGS TO THE LOWEST {COUNTERCLOCKWISE} WHATS THE PROBLEM??? THANKS IN ADVANCED JAY
 
#3 ·
I TURNED THE START PRESSURE UP TO 10 THEN 20 ETC STILL SAME THING. SEEMS TO ME THERE IS APROBLEM WITH THE CONTROLER???
 
#4 ·
Might be the controler, or it sounds like you have the power running to the pump, not the controler...
 
#5 ·
power is running to the controler
 
#6 ·
Then I would say something is wrong with the controler. check all your connections again.
 
#7 ·
checked everything 10 times. i contacted snow havent herd back yet.
 
#9 ·
sending controler back to snow. let youall know what happens.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top