Ford Power Stroke Nation banner

Truck isn't setting level with leveling kit?

878 views 3 replies 2 participants last post by  gtmustang00 
#1 ·
06 F350 with diesel and 6000lb springs. Installed bds leveling kit and the truck sat level. Then i bought a plow and mounted it. Well after this year the nose is down a little bit so i decided to buy new springs. I upgraded to the 7000lb springs, icon adj trac bar and dual stabilizer set up. Truck is still nose diving. Is there something that could be binding up? Any suggestions?
 
#2 ·
Can i add a spacer on top of the coil spring without needing longer shocks? I have the bilstein 5100's that came with the bds kit.
 
#3 ·
What did the bds leveling kit use to level the truck? New springs? Or a spacer on the top of the factory spring?
 
#4 ·
Bds used a spacer on the bottom of the spring.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top