First off im making the bars not beacuse im having severe axle wrap,but just for something to do to prepare for the sled pulls,plus they just look cool.Im making both the mounts(axle and frame) myself.This is going to be my frame mount
the axle mount will be welded on and will look something like this
Now i need some opinions on what tubing/pipe to get
First option:Spare 1 5/8" OD seamless pipe w/ 1/4" wall thickness FREE
Second option:1.9" OD Seamless carbon steel pipe w/ .2" wall thickness $4.50/foot
Third Option:2" OD DOM Tubing w/ 1/4" wall thickness $8.70/ foot
Now i know with the front mount be the way it is going to be it will give me all the articulation that i will need.I was debating if i should use these
or these for the axle end of the bars.
Im going to mount the frame mount wherever i can use the most holes that are already in the frame,so that will determine how long the bars will be.
Pick what pipe you would go with and which axle end for the bars and let me know so i can oder some parts.Thanks.
the axle mount will be welded on and will look something like this
Now i need some opinions on what tubing/pipe to get
First option:Spare 1 5/8" OD seamless pipe w/ 1/4" wall thickness FREE
Second option:1.9" OD Seamless carbon steel pipe w/ .2" wall thickness $4.50/foot
Third Option:2" OD DOM Tubing w/ 1/4" wall thickness $8.70/ foot
Now i know with the front mount be the way it is going to be it will give me all the articulation that i will need.I was debating if i should use these
or these for the axle end of the bars.
Im going to mount the frame mount wherever i can use the most holes that are already in the frame,so that will determine how long the bars will be.
Pick what pipe you would go with and which axle end for the bars and let me know so i can oder some parts.Thanks.