Ford Power Stroke Nation banner

mirror connector pin

1K views 6 replies 3 participants last post by  tjohnny62 
#1 ·
first post on this site. i'm doing the 08/10 mirror swap on my 02 f250. i'm wanting to use the factory retangle connectors on my truck and just add more pins in the connector. does anybody know where i can buy some and what size are the pins. thanks
 
#2 ·
On my 03 F-350 when I put heated/lighted mirrors on it. I found a "Donor plug" at the junk yard. I removed the plug with wire left on both sides, and spliced the wires in to the harness. Inserted the pins into the plugs.

The plug is from a Ford Taurus or Mercury Sable. I found the plug under the hood. Not sure what it was, but it was part of the engine harness.









 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top