Ford Power Stroke Nation banner

coil sprung bump steer

684 views 4 replies 3 participants last post by  Aaron S 
#1 ·
Do the 05 up trucks have any bump steer with the 2.5 inch lifts?

Ive noticed with the coil sprung setup on my 02 that the steering wheel likes to move around more than it used to when hitting bumps.

Just wondering if its something else causing this or something specific to my setup.

Are there any trac bar drop brackets out there if thats what I need?

Thanks
 
#4 ·
I have the icon dual steering dampner setup on the front of the truck.

Il try to take a picture later, but when looking at the linkages from the front, I would need to drop the upper pivot point of the trac bar to get it to be parallel with the steeing link.

Assuming the frames are the same, maybe there is a difference in the steering boxes or the pitman arms between the leaf and coil sprung trucks.

Thanks for any help or ideas that can be offered.
 
#5 · (Edited)
Heres a pic of the front end. What are your thoughts?
Caster is 2.2 on the left and 2.3 on the right, I believe from when I had it aligned. It has the icon cams.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top