Ford Power Stroke Nation banner

New Product to Simplify Wiring

1K views 5 replies 6 participants last post by  16yrenthusiest 
#1 ·
I seem to remeber some ads / articles in recent magazines about some sort of hub that you could connect your accessory power wires to and then just one or two wires to the battery. Does anyone recall what I'm referring to?

I'm not talking about a fuse block, but I think is was a device that would switch the power running to the hub to whatever accessory was activated, such as lights, air compressor etc.
 
#2 ·
You could do that a variety of ways. All you need is a multi position rotary switch. You could even use a blower motor switch. If you run the current thru the switch, you will need a heavier duty one than if you just use the switch to turn on relays.
 
#3 ·
But then you could only run one accessory at a time. What if you needed your air compressor at night. I will use a simple junction box.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top