Ford Power Stroke Nation banner

suspension/tire questions

578 views 2 replies 2 participants last post by  Rancid5653 
#1 ·
So I have an 07 F350 SRW CC 4x4.. It presently has a Fabtech lift on it and Im pretty sure it's 6". The truck has 35x13.50x20 Procomp All terrains (hate these tires alot :mad:)on 20" XD diesel wheels. I've done some research on here and have read a bunch of great information....

The truck clears the tires and wheels no problem. No rubbing whatsoever....

I'm contemplating going to a 37x13.50x20 or a 355-60-20..... Do any of you experts think I will have any clearance issues with either tire choice... And if so, what would be the appropriate remedy....

Thanks in advance....
 
#2 ·
You may have some clearance issues, not 100% sure as we don't deal with the Fabtech.

You'll have a better chance of clearing the 37/13.50s than you will the 355s due to their width.

Depending on how bad any rubbing is you may be able to get away with just trimming the lower valance of the front bumper and pulling the fender liner back.

If that doesn't work you'll need more lift.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top