Ford Power Stroke Nation banner

Nitrous purge placement

819 views 1 reply 2 participants last post by  UNBROKEN 
#1 ·
After my run two weeks ago I was thinking a nitrous purge would come in handy.

Anyone have pictures or ideas on were to have it exit? I remember DJ had dual exit close to the headlights. Looked killer. Also what kit you used.
 
#2 ·
I removed the screw that holds the cowl down on the driver side, drilled out the plastic it goes into and threaded in a brass compression fitting, ran my copper purge line up through it, held it all together with a nut and ferrule then cut the tubing off flush. Purge goes straight up outta the cowl and the way it's in there still holds the cowl down.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top