Ford Power Stroke Nation banner

05-08 axles

1K views 5 replies 5 participants last post by  MilehighEX 
#1 ·
hey guys im thinkin about doin the 05-08 axles in my 97 powerstroke. I just have a question about rim size. I have a set of 16.5x14 welds that i wanna run, they are the 8x170. What im wondering is will they work on those axles or do they require a 17in rim or bigger. Thanks for the help.
 
#5 ·
so than 16.5 rims will fit on the new superduty axles. Is the bolt pattern still the 8x170mm.
 
#6 ·
yes the 8x170mm pattern is the same, 16.5" probably will work with a very short backspacing. CAREFULLY grinding the caliper for clearance could be done for additional clearance at your own risk, then use a belt sander and 80grit to make a nice directional pattern to clean it up. I used the factory 18" 05' King Ranch wheels and they fit perfectly. Using a short back space increases your turning radius due to fender rubbing....food for thought
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top