Ford Power Stroke Nation banner

stacking hpops

2K views 11 replies 8 participants last post by  smokyred 
#1 ·
i have two 15 degree oil pumps and i wanna stack them. wee can i get the adaptor to do this
 
#2 ·
don't know if they actually sell something like that. I would contact Joey at TerminatorEngineering and see what he has to say.
 
#5 ·
Hmm well it seems to be working fine now. Send him a PM he is always very quick to respond and he will call you if you ask him to.
 
#7 ·
#8 ·
I would like to do the 17* dual pumps. Sooooo :popcorn:
 
#9 ·
ok if you can get a resivor off or an international school bus you have it made. the school busses run a powersteering pump off of the front side oposite of hpop but this hole will accept another hpop in a nutshell.
 
#10 ·
The PS pump is run off the backside right above the HPOP, and that housing will not accept a HPOP. It will, however, accept a Haldex gear pump. It's called a Gen3, from Swamps. And good luck finding one of those housings now.

OP, you'll need alot more than just an adapter plate to put two HPOPs inline.

Dave
 
#12 ·
You can get them used, but you won't find a new one anymore. That is why Swamps went to a billet reservoir. And the only way you'll get a used one around here is if you buy the complete motor, and those prices are way out of line versus what I can get a used PSD motor for.

Dave
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top