Ford Power Stroke Nation banner

fuel pressure for spartan???

1K views 7 replies 6 participants last post by  BFT 
#1 ·
i need to know what the fuel pressure is at idle for those running the spartan, preferably the 210 but im pretty sure they are all the same at idle.

ive been having a few problems, as far as the turbos go, with ALOT of lag!
i normally see at idle 0.5 to 0.8 psi and lately have been seeing anywhere from -0.0 to -0.5 and at acceleration drops lower to -0.8.

there are times when the truck acts normal and nothing is wrong until i make a full stop or im off the throttle in traffic or what not. codes that come up are
P006B/ P2265 which have came up twice in the last month/ and P2653.

i am running right now the 210 tune with banks intake ant dpf/cat delete.
 
#2 ·
should be around 4 PSI- at least thats where mine is.
 
#3 ·
sorry, meant fuel rail pressure! i get about 5000 to 5100.
i dont think it has to do woth fuel i might have a boost leak! but i dont see any sut anywhere and the IC looks good.

i think it might be at the Y pipe...that'll be a bitch to get too.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top