Ford Power Stroke Nation banner

Confused I Need Help!

718 views 5 replies 5 participants last post by  recon250 
#1 ·
Ok so i have been looking at Xd wheels and am trying to figure out what backspacing and offset i need to buy in order to get the wheel and tire to stick out about 2 inches from the fender so that they look right under my pocket flares. I would like the Xd 441 series and they only come in a -6mm offset with a 5.24 offset. I will be running toyo 35x12.50x18.

I have been reading about offset and backspacing for the last hour and still can not seem to be able to figure out if these wheels will work on my early 99 and stick out like i need them to. Any help would be greatly appreciated as i am very confused at the moment.

Thanks guys
 
#3 ·
A 10" wheel with 4.5" backspace will stick out a bit. My 9.5" wide wheels with 5.95" backspace are just inside the fender.

+10 and +25 are very common offsets...the +25 will stick out.

If you're reading it in inches the less backspace the more it will stick out.
 
#6 ·
A 10" wheel with 4.5" backspace will stick out a bit. My 9.5" wide wheels with 5.95" backspace are just inside the fender.

+10 and +25 are very common offsets...the +25 will stick out.
QUOTE]


the more postive the offset in mm the more it will stick in, not out
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top