Ford Power Stroke Nation banner

correct wheel sizes and offsets for 05-07 trucks?

2K views 15 replies 4 participants last post by  jdc753 
#1 ·
I installed a leveling kit on the 06 f350 and id like to know what the correct wheel offset is for a 18*10 wheel that wont stick out more than an inch or so. I was looking at the pacer 184p-8187. 18*10, -25 offset, 4.5 backspacing, 8x170mm bolt circle, 3400lb load rating and 125.56 is the hub bore diameter.
 
#4 ·
If i found wheels that had 6" of backspace, would anything rub (minus the inner fender) w/ the bds leveling kit and 35 12.50's?

Im trying to figure out what size wheels will fit good on the truck, like what are the usual specs that people run with 18x9 and 18x10?
 
#6 ·
I have 18x9's with 5" of backspacing and my tires stick out just enough to get things messy but not too much at all. Right on the border of what I like. Mine only rubbed on the factory mudflaps
 
#9 ·
I'd have to see the trucks w/ direct shots on how far the wheels stick out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top