Ford Power Stroke Nation banner

suspension question

788 views 5 replies 3 participants last post by  OBSWIZ 
#1 ·
Hey guys- I just got a brand new 08 6.4. It is equipped with the camper package which I understand means it has heavier coils in the front and aux springs in the back along with a rear sway bar.

My first question is: Is this basically a 350 suspension?

And more importantly: how does this affect my ability to put a 2.5 leveling kit on the truck.

Which leveling kit is the best? I put the Bilstein coil kit on my 6 leaker but would like to try getting away with spacers this time.

Do I need to run 350 blocks and U bolts in the rear?

What do you guys think?
 
#4 ·
I am actually at 10" now

I told my wife when I bought this truck I would only do a leveling kit and 35s....as I have had MANY a lifted truck...well that lasted about 5 days...I got the 6" kit on, after that, then went to 8 and now a nice easy 10"


IF you have the same suspension package as I do/did, then if y ou add spacers in the front you will need to add a 1" block, or remove the stock block and add a 3.5-4" billet, or an F350 block to the rear for it to be level.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top