4R100 to a 5R110 - PowerStrokeNation : Ford Powerstroke Diesel Forum


Home Today's Posts Mark Forums Read
Go Back   PowerStrokeNation : Ford Powerstroke Diesel Forum > Other Diesel Topics > Engine & Transmission Conversion
Register Members List Timeslips Calendar Auto Loans Sponsors Becoming a Sponsor Mark Forums Read Auto Escrow

PowerStrokeNation.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-11-2007, 02:54 AM
heep70's Avatar
heep70
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2007
Location: Bonney Lake, WA.
Posts: 86
4R100 to a 5R110

I really don't know to much about the 5R110 yet. I don't hear anything bad about them as far as failing.


Are the 5R110 autos any good?


Will the two trannies will interchange without any mods (4R100 to a 5R110).
__________________
Greg

2000 PSD F250 4X4 Crew, John Wood 4R100, DP Tuner, 4" Diamond eye, Tymar, LIFT, 35" Toyos, Pillar gauges, TC lockup switch, 6.0L cooler, Single core rad, Most of all a Cool Driver, THATS ALL.
Reply With Quote Quick reply to this message Go to the top
Sponsored Links
Advertisement
 
  #2  
Old 11-11-2007, 04:33 PM
Strictly Diesel's Avatar
Strictly Diesel
Offline
Proud PSN Sponsor!
Member's Gallery
 
Join Date: Jul 2007
Location: Phoenix, AZ
Posts: 2,081
Re: 4R100 to a 5R110

No, they will not directly interchange.

Keep your 4R100, you're better off!
__________________
Dennis Schroeder - Co-Owner of Strictly Diesel
Strictly Diesel Webstore / sales@strictlydiesel.com
LIKE US on FACEBOOK! / Check Us Out on YOUTUBE!
Race Truck :: 6050# / 11.31 @ 120mph / Best 60' of 1.56 ... with "Built" Race Engine (Fuel Only!)
Reply With Quote Quick reply to this message Go to the top
  #3  
Old 11-11-2007, 07:26 PM
heep70's Avatar
heep70
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2007
Location: Bonney Lake, WA.
Posts: 86
Re: 4R100 to a 5R110

What is the bad new on the 5R110?


I have been told by others to not mess with it.
Reply With Quote Quick reply to this message Go to the top
  #4  
Old 11-12-2007, 07:41 AM
gregrob's Avatar
gregrob
Offline
PSN Veteran
Member's Gallery
 
Join Date: Jul 2007
Location: Cowboy State
Posts: 6,652
Re: 4R100 to a 5R110

There aren't enough aftermarket parts available to make it near as strong as the 4R100 can be made.

There are a small handful of builders who have the 4R100 NAILED! It can pull, shift, and last like a dream with the right parts and know how to put it together.
Reply With Quote Quick reply to this message Go to the top
  #5  
Old 11-16-2007, 09:47 PM
Cat_Rebel's Avatar
Cat_Rebel
Offline
OBS junkie
Member's Gallery
 
Join Date: Jul 2007
Location: In or under a truck
Posts: 8,250
Re: 4R100 to a 5R110

Yep, the 4R100 is a good tranny that can be made to hold up to alot of power.
Has anyone even put a Torque Shift on a 7.3L?
__________________

97 F350 CCLB "Da Bus"

RIP Will Iott
"This ain't no practice run"


Quote:
Originally Posted by countryboyrob View Post
And remember, he's cat rebel....he doesn't do it the normal way.
Reply With Quote Quick reply to this message Go to the top
  #6  
Old 01-17-2008, 03:14 PM
Mark Kovalsky's Avatar
Mark Kovalsky
Offline
Former Ford Trans Engr.
Member's Gallery
 
Join Date: Aug 2007
Location: SE Florida
Posts: 2,186
Re: 4R100 to a 5R110

Quote:
Originally Posted by Cat_Rebel View Post
Has anyone even put a Torque Shift on a 7.3L?
Nobody has, and I doubt that anyone ever will. Here's why:

It's WAY harder to make software shift a TorqShift than a 4R100, due to the design of the two transmissions.

The 4R100 is an all non-synchronous design. This means that for each upshift all that happens is a clutch is applied. All you need to do is control the pressure to the oncoming clutch and you're all set.

The TorqShift is MUCH more complicated. The 1-2 and 5-6 shifts are the same, they are non-synchronous and all you need to do is control the pressure of the OD clutch. The other shifts are the problem.

The 2-3 is a swap shift. This is a special catagory of difficult shift. I believe Ford is the only trans maker in the world that still does swap shifts. Others have put swap shift transmissions in production and then replaced them within a few years. To make a swap shift the TorqShift needs to release the OD clutch to downshift the OD gearset while applying the intermediate clutch to upshift the Simpson planetary gearset. This is an upshift and a downshift occuring at the same time in the same trans. From my experience these two shifts MUST complete within 30 milliseconds of each other or it's going to feel awful. If the OD releases too soon the engine speed will flare. The amount of flare is dependant on how much sooner it completes. If it completes before the intermediate has enough capacity the trans goes back to first gear! Then it has to make a 1-3 shift. A few WOT 1-3 shifts means the trans comes out to replace the intermediate clutch. Been there, done that. If the OD releases after the intermediate comes on you end up in 4th gear (1.09:1 ratio) then downshift back to third gear (1.54:1 ratio.) Either way it's really bad.

Now if you made it though that you need to make a 3-5 shift. 4th gear is the 1.09:1 ratio that really isn't used. The 3-5 is a synchronous shift. It's timing requirements are about the same as the swap shift, but there is no downshift. To make the shift the intermediate clutch has to release while the direct clutch applies. If the intermediate releases too soon you get an engine speed flare. If the intermediate releases too late you get a tie up. A tie up is when all three pieces of the planetary gear set are held from turning. This means the output shaft of the trans STOPS. That's not a pleasant thing to have happen when you're at WOT making a 3-5 shift. You can lock the wheels on an upshift! I've done this, too. You can also break expen$ive parts doing a tie up.

Now start thinking of the combination shifts that can happen. How about cruising at 55 MPH behind some slow poke on a two lane road? A passing zone opens and you floor it. Now you may want to go from 6th to 3rd gear. You need to release the direct clutch and apply the intermediate. That's a synchronous shift in reverse.

As you can see from just these few examples it isn't a trivial task to make one of these transmissions shift. It's what I did at Ford for quite a few years, three of them working on the TorqShift. I'd be really surprised if anyone makes a controller for the TorqShift that works really well. I think someone could make one that does some basic shifting, but getting one so that it shifts at least as well as a stock trans is going to be a HUGE task.
Reply With Quote Quick reply to this message Go to the top
  #7  
Old 01-17-2008, 04:52 PM
TurboChris's Avatar
TurboChris
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2007
Location: Huntington Beach, CA
Posts: 150
Re: 4R100 to a 5R110

Holy Crap......great info...thanks!
__________________
01 250 4x4 CC Lariat - 9" Lift, 38" PJ's, Warn M12000, Fox Shocks, 4.56 Gears, Amp Running Boards, Gauges, DP Tuner,AFE, 4''exhaust & more
Reply With Quote Quick reply to this message Go to the top
  #8  
Old 01-17-2008, 04:53 PM
moremph's Avatar
moremph
Offline
2Cruel
Member's Gallery
 
Join Date: Sep 2007
Location: Foster, ky
Posts: 1,645
Re: 4R100 to a 5R110

I was told be a reputable trans builder that thier main fix for a 6.0 making power is to pull the 5r110 and put in a 4r with a standalone!!


Travis
__________________
MPH Enterprises
2L Motorsports
SWAMPS Extreme Powerstroke Performance

Powerstroke Everywhere
Reply With Quote Quick reply to this message Go to the top
  #9  
Old 01-17-2008, 07:37 PM
heep70's Avatar
heep70
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2007
Location: Bonney Lake, WA.
Posts: 86
Re: 4R100 to a 5R110

Geez that sounds like something to stay away from. Great info, thanks for sharing.
Reply With Quote Quick reply to this message Go to the top
  #10  
Old 01-18-2008, 01:39 AM
Cat_Rebel's Avatar
Cat_Rebel
Offline
OBS junkie
Member's Gallery
 
Join Date: Jul 2007
Location: In or under a truck
Posts: 8,250
Re: 4R100 to a 5R110

Thanks for the info Mark. What do you think of Destroked offering a kit to mate a 5R110 Torqueshift to a Cummins?

http://destroked.com/parts.shtml
Reply With Quote Quick reply to this message Go to the top
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




(View-All Members who have read this thread : 283
00f250, 00PSD1, 01freeman, 01powerstrokin, 02POWERSTROKE7.3, 02ST, 04regcab4x4, 086.4xcab, 1SickHarley, 2000psdbio, 24Vford, 250turbo, 350factor, 379cat, 389SixPack, 428qbird, 444-4D, 5superduty, 6.0 six speed, 69W900A, 7.3HD Guy, 97Beast, 99F250Smitty, a2elvis, aggie, Alan Hicks, AlanB, AMB, Arisley, Ausm7499, AzPsd55, badluck_early99, barney1, bean, BFD99, bigbadford01, bigblockhorse, bigd4me2, BIGK, bigwheel, BJS, blacksmoke01, bluthndr, BMac, Bmiller5, breyrw, BrianC, brick, bud48fla, BUFF, builditloud, Bumpin, Bushwakd, camaroicoc, cardiac, CATdiezel, catman_1, cemeyer, CGMKCM, chappy, Charles, chas8180, Chuck B., cltoney, colynj, Cool Canuck, coope3, Country, countryboymma, Cppr_Busa, craigerwilding, CrazyHorse, crazystroke97, crowz, cvdenson, Cwillhite04, Cypriss32, daryl4412, Dave, dbunyip, DcMoore999, DeadBlow, Deerezilla, Deputydog, Desertdweller, Detox, Dieselboy, dieselboyf350, ditch_dawg, DIYiT, donj1977, Doodie, dorton14, dpski, dsberman94, Dzacc, dzlj 50, EverettWV, Evil Eye, farmboy99, flozano, Ford850, fordboy, fordboy424, fords4life, fordtrucksrule7, foxracing0934, Frogman2, fsheare, fuzzys69, fxdwgi, garrett720, genuineford, godofdew11, gosperformance, Got Diesel, greenbeast, greenlion, GTPaul, Hall_393, heep70, HitchHiker, IHPowerstroke7.3, illness, imelmo, jacosey, Jake N, jakef250, Jamie21, Jason73, Java, jebsurf, Jeepermc, Jeff H, jeremiahmercier, Jimbo*, Jngreen, joediesle, joeford302, josesimoes2, Jrgunn5150, jsf350, jvencius, kawa, KFinn, Kickin Y2K, KR69IDI, kupaa, kyle43335, Local851ff, Logan21SV, LowerUnit, lownslow, lubeowner, MADDOG, Madvan, mad_matt, makaveli200369, Mark Kovalsky, mattgw86, matthewd11, mattrac, Mayday, Merc460, micky_blue, Mike K, MILFORD, miller45103, Millheim, moorea, moose99ps, moremph, morepower02, motor_head, Motoxfreak, Mr. Bob, Mr.Smith, MrBill1, Muledude, mustang_gt_350, OBS_Farmer, oh3 6oh, olyaee, onebadcoastie, outlaw 4017, outlaw5.0, paine, peg25, peterson3241, Phatbulldog, Phil, philco, Pipewhiner, pizza pig, planobrute, plzstrokeme, Pocket, Powersmoker, powerstroked97, PSDOWNER, PsRumors, PwrStrk6spd, pwrstroke6john, PwrStrokinDually, randylamarr, Randy_270, rave, RCpullerdude, rebelchevy02, recon250, Redfish, redstroker444, reedi1, RescueF250, robert porterfield, Rogue1970, rollin_smoke, rredalty, rusty1161, seriousdiesel, seven.3psd, shayb, six4powerstroke, skylinedan, sled hauler, slowleak, smokyred, smorris, sparksmx450, Squatch, Steve321, Strictly Diesel, strokethis7.3, Strokin2006, superduty, SuperDutyDave, superf350, tch.280, TerminatorEngineering, Tflook59, The Oiler, TheBigDawgTruck, thehammer69, thetonka, tholt34, Tinscout, tomboyup, TomPethtel, trackspeeder, TrailerHauler, Trapper, trdxc080, TurboChris, TurboDiezel, two-rocks, TxFire, txgp17, TylerDurden, UNBROKEN, urbandiesel, vtine523, Waterfowlmagnet, wdw64, wedge542, widieseltech, worldwide73, XHRcustoms, zach96
Thread Tools
Display Modes


Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:46 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.