Ford Power Stroke Nation banner

6.0 Oil Pressure Sending Unit Location

30K views 7 replies 5 participants last post by  6.0 Rexcursion 
#1 ·
Can some one show me, with pictures, where the oil pressure sending unit is for the dash gauge?

Thanks!
 
#4 ·
I dont have a pic, but it is on the oil cooler, next to the oil filter housing. You will have two sensor one "grey connector" the second "black connector." The black is the one you want, the grey is oil temp. Your turbo oil feed line bolts down on the cooler next to the sensors.
 
#6 ·
The EOT signal is used by the PCM to calculate fuel quantity, injection timing, and glow plug operation.

The Oil Pressure Switch is just for the dummy gauge on the dash
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top