Ford Power Stroke Nation banner

zoodad

940 views 4 replies 3 participants last post by  csmyj 
#1 ·
keep seeing this zoodad mod was wondering what that is and does? along with a boost fooler does it help?
 
#2 ·
ZOODAD is done when you remove the grill and drill a large hole or series of holes in the header panel on the driver's side.

If you remove the grill you will see the outside temp probe on your right side. If this probe isn't present you will see a large area that sits at an angle. Remove the sensor (if present) so it doesn't get damaged. Then find a hole bit and drill to your heart's content. If you have a dremel you can smooth the hole and increase the size if needed. Then get the hose so you can rinse the dust off and let dry, come back with some black paint to cover the edges for a stock look. I'd post pics but IT has us on lockdown.
 
#3 ·
Ok thanks and I'm assuming it increases air flow and when you get a chance or anyone else does would likebto check it out thanks.
 
#4 ·
Zoodad Feeds cool air to intake and at highway speeds acts somewhat like a ram air setup. Lowers IAT's.



 
#5 ·
Sweet thanks for the pics seems easy enough
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top