Ford Power Stroke Nation banner

2004 f 350 wont start

988 views 3 replies 4 participants last post by  toolmangary 
#1 ·
I just did head gaskets, egr cooler, and oil cooler on a 2004 f350 powerstroke 6.0l
I had the cab off to do all this
put the cab back on connected all wiring
fuel pump is running
injectors are ticking and getting fuel to the injector lines
there is no smoke out of the exhaust at all when cranking
was running and driving before I did a;; of this now it wont and im stumped please help
thank you
 
#3 ·
i have low injector pressure code changed spring..updated banjos..drove it 20 miles home fro my garage parked it drove it one mile or less and it died had to be towed home well i pulled ipr it had a split screen but seemed to be fine replaced screen..new fuel pump new fuel filters..new synthetic oil it is a late 04 has blue 2004 model on valve cover so ive read it doesnt have a stc fitting on hpop could this be dummy plugs maybe? or something in the tank the two filter screens on the fuel sending unit inside the tank?
 
#4 ·
X2 on what Lenz says, I put a battery charger on each battery and usually 2-3 minutes of cranking and they fire. What do you have for codes?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top