Ford Power Stroke Nation banner

Gauge wires on a 6-speed

598 views 1 reply 2 participants last post by  Betaracer 
#1 ·
Is there a place to chase wires through the fire wall on a manual transmission truck or do I need to get the drill out?
 
#2 ·
I used the factory bundle location. Awkward, but not too bad. I used a straightened coat hanger and taped the wires I wanted to pull through to it. Aim for a spot around the perimeter of to bundle and poke.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top