Ford Power Stroke Nation banner
Status
Not open for further replies.

Maintain's Install Info..lots of good stuff here!!

11K views 1 reply 1 participant last post by  Marty 
#1 ·
I usually have to go link to another site or thread or whatever. It would be nice to be able to just move the mouse up to the top of the thread I'm in when here and just get it here. Can a mod make this a sticky?



Maintain's Informative Creations!


Relays under the hood, multiple angles.





How to make your own boost fooler.



How to remove your turbo.



Turbo Dissembly, out of truck.



Rear bind clamp info.



What the Exhaust Back Pressure Valve sounds like when Activating.



Gutting/Plugging the Pedistal (I know it says exhaust back pressuve valve but that part of the video got cut off)



DP Tuner Chip Install.
http://www.dieselmovies.com/view_video.php?viewkey=b0395e163467c9dae521


Fuel Filter Drain O rings



http://home.centurytel.net/sabre/drainvalve.html


Oil Rail Plug Removal (under valve cover)



Injector Removal



Injector Installation



Purging cylinders after Injector installed (glow plugs out).
 
See less See more
16
#2 · (Edited by Moderator)
Re: Maintains Information

Glow Plug Wire, under it is a 10mm bolt that requires a 1/4" drive, deep socket 10mm.



Glow Plugs



Buzz Test



Testing for Bent pushrods



Head Removal



Hpop Information





HPOP and Resevoir removed.





Fuel Pressure Regulator



Headstud Install



Valve Spring R&R



Headstuds and Aftermarket Valve springs installed



03 Turbo Swap into an 05+



Water Pump Replacement


Cruising around
http://smg.photobucket.com/albums/v315/MazdaMartinb4k/madmatts%20house/?action=view&current=M2U00078.flv




You can use silicon on the dipstick tube O ring that goes on the tube and into the holder as well to keep it in place and from leaking.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top