Ford Power Stroke Nation banner

PMR's doing work...

2K views 7 replies 6 participants last post by  motor-man 
#1 ·
Ended up running a 8.6 at 80mph. With it spinning like crazy. I definitely think theres more in it.

And I pulled 283' in work stock. Ended up getting 6th place.

Stock head bolts, push rods, springs, and even intercooler boots.

 
#3 ·
Do it.

There is just nothing in stone about when it will blow.

And fwiw, truck has been like that since July of 2011. Calculator puts it at very close to 500 rwhp.
 
#5 ·
Sorry I haven't updated my sig here. I haven't been on in forever.

Full Force 250/100% hybrids.
38R
Dual Superduty pumps and regulated return from Martys Diesel
Twisted Diesel Stage ll Transmission
DI One piece up pipes
 
#6 ·
That upshift to 3rd (I think) is killing you, you would do better if you could get a pulling tune that kept you in 2nd gear so your RPMs will be higher at the end when the sled is pulling you down. Most of the tuners can tune you so you don't get that shift to 3rd. Good running truck!

-Dave
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top