Ford Power Stroke Nation banner

swapping axles

1K views 13 replies 8 participants last post by  5W0P3 
#1 ·
I have an 03 f250 4x4 with the 6.0, and have a buddy that has an f350 with the 7.3 99 model i believe. His truck has 4.11's and I have 3.73's. How hard will it be to swap the front and rear ends between the two truck. He is wanting more fuel economy and I need the lower gearing for pulling.
 
#3 ·
They are a direct swap.

Park them next to eachother on jack stands and you'll be done in an hour or 2.

He'll have 4.10's. Verify his is a 350 not a 250 as the early ones had a Dana 50 front.
 
#11 ·
Most likley it will have the 60. 02 is the year they started putting 60s in the front of the srw trucks. Mines an 02 and it came with a 60.


Aaron
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top