7.3 Powerstroke Injector removal and install - PowerStrokeNation : Ford Powerstroke Diesel Forum


Home Today's Posts Mark Forums Read
Go Back   PowerStrokeNation : Ford Powerstroke Diesel Forum > F-250 & F-350 1986-1997 & Other Ford Trucks > 1994-1997 Power Stroke Technical Info
Register Members List Timeslips Calendar Auto Loans Sponsors Becoming a Sponsor Mark Forums Read Auto Escrow

PowerStrokeNation.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-31-2011, 01:15 AM
ascrap2003's Avatar
ascrap2003
Offline
Famous words "Watch This"
Member's Gallery
 
Join Date: Feb 2011
Posts: 264
7.3 Powerstroke Injector removal and install

Finally got some injectors, well 4 anyway. Ryan Casserly Stockers

To start I removed the vc & gasket then removed the oil plug as seen below. Make sure the alen wrench is a snug fit. There are 2 of them one on left top of head & one on right, this beats purging the cylinders when done.

Next you gotta remove the oil spout bolt & two injector hold down bolts.
You gotta use a wrench for the bolt under the injector plug.


Focker in law took off with some of my tools so I used the open end of a 1 1/8 wrench to pry injectors worked pretty nice.

Next just remove injectors slowly "So that brass washer dont fall off" one at a time, now just install new injectors seating them with a rubber mallet & reverse the whole process.
Torque everything to spec.
__________________
2002 F350 SuperCab SWR Lariat, Hutch Mod, EBPV Delete, Down Pipe,

My websites:
Non Ferrous Metals Recycling
X-ray film recycling
Aircraft Engine Buyers
Reply With Quote Go to the top
Sponsored Links
Advertisement
 
Sponsored Links
Advertisement
 
  #2  
Old 08-31-2011, 02:06 AM
biggreen96's Avatar
biggreen96
Offline
PSN Veteran
Member's Gallery
 
Join Date: Aug 2010
Location: Visalia,CA
Posts: 671
Re: 7.3 Powerstroke Injector removal and install

Just fyi you only need to remove th bolt on the out side to remove injector.
__________________
96 cclb f350.
idm mod,
gauges-boost/pyro/trans temp
afe stage 2 intake
dp to 4" straight pipe
studs, springs, pushrods
srp1
intercooler
electric fuel convertion
238/100
dp-tuner f6
T-4 mount and s470.
Reply With Quote Go to the top
  #3  
Old 08-31-2011, 03:39 AM
ascrap2003's Avatar
ascrap2003
Offline
Famous words "Watch This"
Member's Gallery
 
Join Date: Feb 2011
Posts: 264
Re: 7.3 Powerstroke Injector removal and install

Outside? Ah ok I get you now!
Reply With Quote Go to the top
  #4  
Old 09-21-2011, 02:22 AM
Black_Clouds's Avatar
Black_Clouds
Offline
PSN Local
Member's Gallery
 
Join Date: Oct 2008
Location: Houston
Posts: 87
Re: 7.3 Powerstroke Injector removal and install

i removed my injectors and modded them and now i cant get my truck to start..i filled the hpop with oil and there is fuel in the bowl...any tricks to getting the air out quickly instead of just cranking?
__________________
96 F-250..5 speed,3.55,285/75/16 toyomt,ts 6 pos, DI tunes, 4 inch MBRP straight pipe,TYMAR intake,AFE Big Boost filter,129,xxx, Stroked A codes (stock nozzles for now) 15* HPOP,...coming soon.. custom turbo,t1000 or srp1,e fuel
Reply With Quote Go to the top
  #5  
Old 09-21-2011, 02:40 AM
jmsmith76
Offline
PSN Local
Member's Gallery
 
Join Date: Mar 2010
Location: Middle GA
Posts: 446
Re: 7.3 Powerstroke Injector removal and install

keep on crankin, it takes awhile. just let your starter cool between tries so you don't burn it up
__________________
-John-
1996 F-250 Ext Cab Long Bed 4x4 w/ a few mods
Reply With Quote Go to the top
  #6  
Old 09-21-2011, 04:27 AM
powerstroker66's Avatar
powerstroker66
Offline
PSN Local
Member's Gallery
 
Join Date: Mar 2011
Location: pipersville, PA
Posts: 326
Re: 7.3 Powerstroke Injector removal and install

i left the injectors unplugged and the glow plugs out then cranked it to build pressure and make it easyer on the starter. Then re-installed the glow plugs and pluged in the injectors and she fired over with in 2 15 second cranking cycles.
Reply With Quote Go to the top
  #7  
Old 09-21-2011, 03:08 PM
Bradbilt's Avatar
Bradbilt
Offline
STILL LEARNING
Member's Gallery
 
Join Date: Oct 2008
Location: Gilbert PA
Posts: 16,462
Re: 7.3 Powerstroke Injector removal and install

Quote:
Originally Posted by powerstroker66 View Post
i left the injectors unplugged and the glow plugs out then cranked it to build pressure and make it easyer on the starter. Then re-installed the glow plugs and pluged in the injectors and she fired over with in 2 15 second cranking cycles.
Good plan
__________________
Looking for Blue 40-20-40 seat for OBS. PM me if any known
Reply With Quote Go to the top
  #8  
Old 09-21-2011, 03:32 PM
OUTLAW101
Offline
Member's Gallery
 
Join Date: Feb 2010
Location: Pittsboro, IN
Posts: 1,241
Re: 7.3 Powerstroke Injector removal and install

Quote:
Originally Posted by powerstroker66 View Post
i left the injectors unplugged and the glow plugs out then cranked it to build pressure and make it easyer on the starter. Then re-installed the glow plugs and pluged in the injectors and she fired over with in 2 15 second cranking cycles.
All that does is purge the cylinders. I do however reccomend for everyone to do this. Taking out the oil galley plugs sometimes isn't enough IMO.
__________________
late 99 black CCSB
Reply With Quote Go to the top
Reply


(View-All Members who have read this thread : 346
00 ford f250, 01 silver bullet, 01International7.3, 01pwrstkr, 02POWERSTROKE7.3, 03ranger30, 03_7.3POWER, 04blackcrewcab, 06KingRanch6.0L, 1978psd, 1SLO GT, 2000XLifted, 4duggan, 7.3 Blackout, 7.3 stroker10, 7.3-6.0-6.4, 7.3EX, 7.3lsmoker, 73stroke99, 79Ford7.3, 7THREE, 89 Stroker, 91turbogsx, 94.5stroker, 94Matt, 94youngturbo, 95 smoker stroker, 95powersmoker, 96Crewcab7.3, 9773, 97Powerstroke Boy, 97Stroker13, 97supercab, 97XLT7.3, 99whitestroker, Adam.Niesen, alpipehand, Alvapowerchoke, arctic-20v, ArXane, ascrap2003, AZF350PS, babyjones, badblack01gt, BadDogPSD, bagels71, Balthasar, Beefy446, bfoster, Big Chuck, Big97fordpowerstroke, BigBlockBanjo, biggreen96, Bignbadbelair, bigwhite95, Black 02, Blackbullet73, blackstar, blackvr4, Black_Clouds, Blake8550, blane, BlindViper, BlkNTan, bluedevilslax, bmxanrchy127, bobbycollins, Boost96, boostaddict, borncountry, Boydog, bpa658, Bradbilt, brick, brock04gt, Browning, Bullitt#829, BURNSY_B_STROKIN, Bushwakd, camd94234, CanadianPS, ccf350stroker, Ceelock, Chadahootchie, cheap bronco, Choupique108, coalroller78, conman365, constF350, copeland1456, Copperhed, cory99, Critical, csilvers1984, cthom388, czangli7, d-selpowereddiebauer, danielzink, danimalmanimal, Dansk, Dasaliac03, dave jr, DaveBey, davidamontoya, Day-Day, Deererainman, Derek C, Diesel dummy, Dieselboy, DieselTiger, Dieslnevan2009, dizzy8085, djl95, DoableSalvage, dogmaticus, dragonboi, Drew2010, drh4250, dschack, dsinderson, dtott, Dwduggins, dyoung14, DzlNut, e.gresham, eastcoastevolutionjl, ElkBowHuntR, ericlouie1, Ethan218, f250towrig, F350fummims, farmboy17, Fire Mechanic, FL-R, FlatbedStroker, floridastroke, ford7.3sd, fordboy324, fordman73, fordnut, foxman, friskyjake, glasseater, glovemeister, Gone Huntin', gordo1384, grantw1221, greenbeast, greenmachine07, gsxr1216, Guynormal01, hellerb68, hendricksbus, Hijo202, Hoss1997, hwrdbd, ilh, iluv83vettes, Impulse138, internationalpsd, Iowa 73, iowacornfarmer, Ithumpwheniwalk, Jackson Dairy, jakes2000, JD3020, jerry k, jethro442, JGod, Jjona5, jkrum10238, Jlh, jmsmith76, John-Boy, johndeereman, jonstangnelson, jpstroke96, jrbrock, jrracerdad, jschildm, jtrk13, ju015dd, just shawn, justinlogue5_0, juvenile9, K5383, Kgaeta92, kip4234, klos, kramarj, kvn555, kyl1316, lght1, Lildiup, lilhixson, littlewoody, LoneStar7.3, Lord Humungus, loudmouth, lynyrdskynyrd95, m j, M8xpld, madpogue, maineboy11, maritimer10, markfuga, Matikus, Matt-F350, metrojd, mike t., mikes95powerstroke, milehighstroker, MILFORD, moco, mojoman, MoparNut-Gone-PowerStroke, mrit, msscatter, muztangFB, mwbuilds, my92issues, myloyambag, natetheace, NDPSD, NE-STROKE, Neal21, NEDEERHUNTER, Obspsd7.3, OBSWIZ, old Smokey, Onfirepowerstroke, opieg01, Otter70, OUTLAW101, pappa b's powerstroke, parne, Patrick Feeley, Patrolman, pc97f350, pdj4814, petermoblin, Petro, pff250hd, phercinger, pkcole, plowguy1225, Poh, ponypusher58, powersmoker73, Powerstoke_Fan, POwerstroke Named BIG D, POWERSTROKE2311, powerstroke29, PowerstrokeR00, powerstroker66, Powerstrokin96, Prozon, psd kid, PsRumors, pstrokin97, pungohboy, Pwnm30rdi3, rafter3w, rayd1969, rayrayray01, Red95stroker, reedi1, reptillikus, ridnskyhigh, RNally, rndllquinn, ROB240, Rocket Pig, Rocketnut, Rodknocker, Roenicke95stroker, rollingthunder, rolsmojave3, rorednick86, roughneck0913, rusty1161, schlutzer, Schofield1990, sdm, shoebear, sjdiesel, slowleak, slymjym350, smokee, sniperjms, SouthJerseyStroker, spike, steinerr, strokefreak, STROKENPA, STROKER #1, STROKERBO, strokertown, StrokeThis99, strokin1995, Strokin450, StrokinAces1973, StrokinSince97, Strokinstrong, TacticalMonk, tcwilson4, tecatehubbs, tella, TheHamm, THUNDERstroke73, tongboy, toolmangary, tractorman1365, travis182008, trimacwest, tubular031, TylerDurden, T_444_E, umpalumpa1985, USAF_EOD, vader's fury, venomusduck, walkerblayne, WannaRollCoal, water_junky, webb06, Why Not, wiblueboy, Wilson444, wilster734, WishinIwerFishin, woodsman, wvmike, wyrider, yavorssj, zarrinvz24, zilla68, ZOSO, Zrock, zusmc
Thread Tools
Display Modes


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:29 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.