Ford Power Stroke Nation banner

wheel offset/back spacing....

2K views 4 replies 2 participants last post by  turbobobby 
#1 ·
OK, so I have a 2002 f250, it has 6" icon spring lift, weld racing 16x10 wheels that have 3.5 back spacing with 315-75R16 tires.
I am ordering 20x9 wheels with 5" back spacing and 37x12.50R20 dune grapplers.
I am looking to have my tires just at the edge of my fenders. Will this combo work or do i need to less back spacing?? IE 4.5 instead of 5.
Any advice is appreciated!
 

Attachments

See less See more
2
#2 ·
5" BS may rub the springs..4.5" is the correct BS.

Measure how far the tries stick out now subtrack the difference in BS and the width of the rim..= answer as close as you can get.
 
#3 ·
This example truck is an 11 SD 4x4 with the wheels 20x9 and the 37-12.50R20 tire and 5 back spacing. This is the look i am after, Will this same wheel sit way up under my fender or even with the fender lip?
I do not want the tires tucked up under, just looking for the even to just a tiny bit past the fender lip.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top