Ford Power Stroke Nation banner

Stock height with 20x12 and 35's

23K views 12 replies 12 participants last post by  JustAFenceBuilder 
#1 ·
I know this subject has been beat over and over again. There are a few guys running 20x12's with 33's but I want to know who is running 35's.

I just bought 20x12 xd armours and federal mt's. I just want to see who thinks they can clear a 35 with a leveling kit.
 
#3 ·
I attempted to run 20x12's (XD Armours) and 33's on my '06 and the tires would rub WAY before full-lock. I had to level mine AND trim my fender liners to run 20x12's and 33's. I would imagine you'd have to do a 4" lift to run 35's.

The offset on the 20x12 XD Armours is pretty extreme.
 
#4 ·
I run 35s with stock wheels with just leveling kit, but could use a tad bit of offset as tire rubs at full lock on springs
 
#5 ·
I have 18x12 on 33s with a leveling kit and they rub the inner fender but its not too bad. 35's would require at least a 4" lift IMO but you could do it with a leveling kit if you don't mind trimming
 
#7 ·
I have 35s on a 20 by 12 and I just had to trim my inter fender
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top