Ford Power Stroke Nation banner

finally time to rebuild trans, want clutchs

787 views 3 replies 3 participants last post by  Binder man 
#1 ·
well guys im finally gathering all my parts for my trans rebuild i desided what tq to go with and what im all going to do for mods inside the trans. but the last thing i was looking at was what types of clutchs i should use.
I see alot of kits come with alto red eagles but some say they dont last as long because there made thinner so you can put one extra in, others say there great. i have also heard good things about the raybestos stage one clutchs to. I guess what im getting at is what clutchs would you guys use?
thanks guys
 
#4 ·
Most people run alto red eagles, including alot of your aftermarket trannis. If your somewhat stock raybestos are good too.

Altos come in different thicknesses depending on what you want. You can machine parts down or use different snap rings to fit extra clutches.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top