removing the exhaust back pressure valve??? - Page 4 - PowerStrokeNation : Ford Powerstroke Diesel Forum


Home Today's Posts Mark Forums Read
Go Back   PowerStrokeNation : Ford Powerstroke Diesel Forum > Super Duty 1999-Current > 7.3L Power Stroke - Aftermarket & Performance
Register Members List Timeslips Calendar Auto Loans Sponsors Becoming a Sponsor Mark Forums Read Auto Escrow

PowerStrokeNation.com is the premier Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #31  
Old 06-16-2010, 02:49 AM
2wd_sled_puller
Offline
PSN Newb
Member's Gallery
 
Join Date: Jun 2010
Posts: 30
Re: removing the exhaust back pressure valve???

Im sorry i sound like a broking records but can someone tell me where it is located.
__________________
97 f350
fpr mod, diy intake, zf5 tranny, 230k miles alot more mods to follow

Mr Goodtime
97 chevy 2500
5 ton running gear 40 inchs of lift on 54's ya its big but fun
Reply With Quote Quick reply to this message Go to the top
Sponsored Links
Advertisement
 
  #32  
Old 06-16-2010, 02:54 AM
roughneck0913's Avatar
roughneck0913
Offline
PSN Veteran
Member's Gallery
 
Join Date: Oct 2008
Location: Monte Vista co
Posts: 780
Re: removing the exhaust back pressure valve???

i would delete the ebpv accuator remove it like i stated in a couple posts up drill and tap the hole the rod was in and put a pipe plug in it remove the metal shavings put the aluminum plug back in with snap ring. or build a plate and weld the big hole closed your choice or buy a non ebpv pedistal put new orings under pedistal install pedistal put new orings in for turbo install turbo and walla ebpv delete done
__________________
2000 f-250 4x4 cclb 6 pos tuned by cale airdog 250, holding a stock tranny. afe cold air few other tricks under the hood always
Reply With Quote Quick reply to this message Go to the top
  #33  
Old 06-16-2010, 02:55 AM
roughneck0913's Avatar
roughneck0913
Offline
PSN Veteran
Member's Gallery
 
Join Date: Oct 2008
Location: Monte Vista co
Posts: 780
Re: removing the exhaust back pressure valve???

Quote:
Originally Posted by 2wd_sled_puller View Post
Im sorry i sound like a broking records but can someone tell me where it is located.
where what is located?
Reply With Quote Quick reply to this message Go to the top
  #34  
Old 06-17-2010, 12:08 AM
DIESEL DAN's Avatar
DIESEL DAN
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2009
Location: West Bend, Wisconsin
Posts: 236
Re: removing the exhaust back pressure valve???

WHAT DO I DO ABOUT THE ROD??? DO I JUST LEAVE IT HANGING DOWN???
__________________
Early 99'(10/18/98)f-250,4x2,Super Cab XLT 8' Bed
MBRP 4" Turbo Back W/ 5" Tip,
Grover 1700 Single Trombone Air Horn
Coolant filter Bypass W/ Napa Gold #4070 Filter
Air Intake #6637 Filter W/CCV Mod,V-10 Trans Cooler
Stewart Warner Gauges: Trans,Pyro,Boost,
15% Window Tint
Retro Solutions 55 watt HID's 5000k
08' Super Duty Finned Diff Cover
Reply With Quote Quick reply to this message Go to the top
  #35  
Old 06-17-2010, 12:16 AM
Slated4Greatness's Avatar
Slated4Greatness
Offline
PSN Veteran
Member's Gallery
 
Join Date: Jul 2007
Posts: 586
Re: removing the exhaust back pressure valve???

If you just buzz the rivets off and leave the shaft you don't have to worry about closing up the hole or what to do with the arm.
__________________
2006 F350 Lariat Tow Boss W/training wheels.

SCT W/ID's tunes, ARP's, Blk & Heads milled, Strictly RR and aux cooling lines, 6" Aussies, Snow MPG-Max, BPD EGR and W/Pump, Coolant filt, , Air bags, Train Horns, CTS (4 Monitoring only) + Autometer EGT,Trans,Boost Arizona Powerstroke Group

RIP Muley 9-25-09
Keep on Honkin' Jerry 04-05-10
Reply With Quote Quick reply to this message Go to the top
  #36  
Old 06-17-2010, 01:16 AM
opieg01's Avatar
opieg01
Offline
Work in progress
Member's Gallery
 
Join Date: Dec 2009
Location: Yankton, South Dakota
Posts: 517
Re: removing the exhaust back pressure valve???

marty has a video. Google works wonders
__________________
2001 F-250 4X4 LARIAT Crew Cab,7.3, ZF6
GTX-4294r, Swamps 300/200%
couple other bolt ons
Reply With Quote Quick reply to this message Go to the top
  #37  
Old 06-17-2010, 02:25 PM
genuineford's Avatar
genuineford
Offline
dinnerbooter treasurer
Member's Gallery
 
Join Date: Oct 2007
Location: Vesper, Wi
Posts: 3,567
Send a message via ICQ to genuineford Send a message via AIM to genuineford Send a message via MSN to genuineford Send a message via Yahoo to genuineford
Re: removing the exhaust back pressure valve???

When I delete them I take the pedestal off and remove the snap ring from the back and take the guts out of the actuator. Then i drill the hole and tap it to accept a 1/4 inch npt plug. Otherwise you run the chance of it leaking. The other option is to buy a non ebv pedestal.

__________________
93 F350 Gasser
03 F250 6.0
dinnerbooter #3
Reply With Quote Quick reply to this message Go to the top
  #38  
Old 06-17-2010, 06:53 PM
DIESEL DAN's Avatar
DIESEL DAN
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2009
Location: West Bend, Wisconsin
Posts: 236
Re: removing the exhaust back pressure valve???

Quote:
Originally Posted by genuineford View Post
When I delete them I take the pedestal off and remove the snap ring from the back and take the guts out of the actuator. Then i drill the hole and tap it to accept a 1/4 inch npt plug. Otherwise you run the chance of it leaking. The other option is to buy a non ebv pedestal.


I'm i gonna have to replace the o-rings than? how do i remove the pedestal?
sorry, i'm new to all this!
Reply With Quote Quick reply to this message Go to the top
  #39  
Old 06-17-2010, 06:59 PM
DIESEL DAN's Avatar
DIESEL DAN
Offline
PSN Local
Member's Gallery
 
Join Date: Nov 2009
Location: West Bend, Wisconsin
Posts: 236
Re: removing the exhaust back pressure valve???

i also just found this. is it true??? or is it ok to plug without ANY problems?


OEM



Email this to a friend

OEM Non-EBV Pedestal - Early '99 Ford Powerstroke (PRE 12/98)
FREE WITH ORDER: Two sets of o-rings (upper and lower) included for installation

YOUR COST: Qty
$135.00



Personalization
Check here to confirm there are no returns on this item. (Required)


Detailed Description
This is the Non-EBV pedestal for the Pre- 12/1998 7.3L Ford Powerstroke.

If you have removed your backpressure valve EBV from the outlet of the turbo, you need this pedestal.

Q. If I disconnect the sensor, some say this will throw a code ,so they remove the turbo, cut the actuator rod off, and tap the hole in the pedestal and put a plug in it with the sensor still plugged. Is this "ok" to do?

A. If you simply plug the hole and leave the sensor plugged in, you may cause yourself the loss of a turbo from lack of oil flow. Let me explain. The same feed port that feeds the turbo bearing is feeding the EBV piston. There is one supply port and one return port in the pedestal. When the EBP sensor sends the signal to the pedestal to shut the valve,which is not there in this case, the oil dumps off to the return port in the pedestal with no resistance. This is the same return port as the one for the turbo. The piston separated the two when it is was properly used from the factory. Basically, while the valve is being actuated or attempted to in your case the turbo gets no oil or very little. The turbo bearing is the highest place in the engine for oil to travel and it will follow the path of least resistance. If you remove this piston in the pedestal, you MUST not allow computer control of the valve any longer. You must disconnect the sensor from the pedestal. Yes, you will get a code (not a light) telling you the valve is non-operational, but it's the only way to do it.

THERE IS NO CORE CHARGE ON THIS ITEM.
Reply With Quote Quick reply to this message Go to the top
  #40  
Old 06-17-2010, 10:36 PM
Ron's power stroke's Avatar
Ron's power stroke
Offline
FORD..THE ROCK CRUSHER
Member's Gallery
 
Join Date: May 2008
Location: Whitefield,NH (The White Mountains)
Posts: 2,146
Re: removing the exhaust back pressure valve???

both will do the job..i moded mine with a stock turbo then went with a deleted kit when i got my 38R...the only diff's is the bolt head sticks out in your's.. and the already deleted one has none...i moded my stocker cause it leaked and a kit didnt fix it...IMO if mine didnt leak..i wouldnt mod it...a new one is big bucks...you could sell your's later to cover the cost of a new deleted one...there are people out there (like craige list) that run these trucks and believe these need to be in place...
__________________
Early 99 7.3 F350 auto,TN T-4 mount with a s467 for air,H-11's stud's SRP 1.1 for oil all supplied by unlimited diesel..beehives, DI push rod's, new alliant 315/200 hybrids,Driven diesel fuel system with a fuel lab 41401. ...tuned by Gearhead..

88 F250 7.3 IDI plow truck 112k - bone stock.
Reply With Quote Quick reply to this message Go to the top
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




(View-All Members who have read this thread : 514
'99 stroker, 00f250psd, 00PSD, 01platinum, 01REDSTROKER, 01stroked, 02BigD, 02POWERSTROKE7.3, 02strokinhauler, 0373, 04stroker, 06-f350, 07f450, 16yrenthusiest, 1997stroker!, 1craneguy, 20007.3stroker, 2000XLifted, 2006nytro, 2dedge, 2wd_sled_puller, 444-4D, 5290, 6.0beau, 69800, 7.3 superior duty, 7.3boys, 7.3LStrokeR, 7.3pokesfan, 7.3SuperDuty, 710_burner, 89xj, 92fordcummins, 94psd5speed, 95ef2fiddy, 96stacked&smoken, 96stroke957, 97-BIG RED, 9755, 97obs, 97powerstrokety12, 97rattlebox, 97WhiteFlatty, 99.5crewstroke, 99Towbeast, aCab, AK1, aklim, amscontr, andrewz, Andytheman24, ant250, aquadreamin, Arisley, asalm36, Balthasar, Bamboo, Barnbuilder, bazdog1, BB540C2, BDP Tuner, Big Bronze Rim, Big Calo, Big-Stroke, BIG-T, bigbadford01, bigern515, Biggin'ZRT, bigred2001, bigred3/4, bigrngyj, BigTXForddiesel, bill4d, billguns1, birdog, black7.3, blackmagic, blacksmoke.r.us, blair, blk mk8, bls, blueoval95, bluovldeezl, BNissen205, bolt_bucket, brahum, BRAVO, brick, bruce51d, bryan.d, bryan213, BT500, budd, Buford-61, bulldog01, c con, c.salt, Calico5, cardiac, CARR, caspower, Cat00, cchoptank11, ccradier, Cessnakid, Cgate86, chris1978, chrisstewart36, ChunderDownUnder, chunkdunker, cj45lc, CLIFORD3, Cmonster, CMPNS8N, cobrabc1993, cody342b, COFG-28, CompOrangeCobra, cool_hand_luke, copracr, cota, cowboyengel, Cowboyup, cowboy_dan, crawlake, Crazzy8, cretedogg, Critical, crowz, ctch1, CumminsTrader, CUMMINS_KILLA99, Cutty72, cvdenson, cwprosser, danielzink, Dantheman, darkside708, darkstar, darrell401, darren.corbin@gmail.com, davewild, dave_k96, David Kennedy, David N, deathwishracer, DEEREPULLER, deerhuntr, deiter5262, Delta161, Denver, DHTD, DIESEL DAN, Diesel Mack, DieselBrad, dietoremain, dirtboy25, ditch_dawg, dixieland-diesels, dixokai, DJM, dlnw98, dltnjarrel, DMOSE10, dmstrucks02, Doodah, doubledoor, dpski, dpwilson, Driles85, Duane l, Duanesz, duncan351, Dustin F2504x4, dusty9, e.nickkk, e99pstroke73, EastTexasF250, eleventhtruck, ElkBowHuntR, endonoz, enenuenue, Erle385, ExtremeFord4x4, f250Towpig, f250towrig, F350_7.3, factorydefect, farm boy, farmall99, Fast&Strong, fastbarryracing, fbm1344t, fergus, ferociousfish, firefighterbam, firefighterwp1, Fischer, fordguy19761994, Fordguy26, fordguy64, fordman2121, FordPower, FordRacer, forrest7roughneck, FourByFord, Franken-stroke, Freshmeat, friskyjake, fst2000, fyn409, fyrehose, Gaius, GavinRiepe, genuineford, Gnathv, Goatwrangler, goodintentions, GotPayment?, Gotti2k7, gstang408, Gutierrez9287, hammer249, Hater04, haulin2000, Hawker, hawkeye, Haz-Matt, Hco4x4, hdchopfather, Headcase98002, Highbeam, HMBUILDER4U2004, hofiveo, Homesteader, Hoofbeat, hopperwagonbob, hotrodtodd, HotRodTractor, houtxfdcapt, HubrisHCC, huck31, icacalive, icanski2, ImpactDiesel, iron butterfly, isky1843, itburns, itsallinthestroke, J HO 22, j440, jababson, jacmurr, jakepolly, jawsfx4, jaybuller, Jcbemer, jcc01, Jchappy12, Jdg41, jerryjust, JerseyJim, Jesse Lambert, JHill, Jimmyb4000, jlau6888, joediesle, joezex, johnday, JonFord, jopes, Jordy53, Joshuastroke2000, jpowerstroke, jsmith, jtbowen31, jtsparks2, ju015dd, junkman306, JustDiesel, jvencius, kam22, Kampy, kawie400, kbragg430, kfluke, kickinupmud, kilapapipa, Kingcobrav9, KingCrabb, KingRanchSick.0, knoxville, krc0864, Ks94.5powerstroke, Lab Rat, LaJ10, lizready13, lkroeger, lubeowner, lwcwb08, mannscustommotors, MARKIS, markt, Marty, Mat J, mattk9, maverick5.0, mbg75, MDRhoads360587, meandog06, metalnova, mgeod, mike61, minerz, Mink, mitch7.3, mjones, MLR80, MN_MountainMan, Monstar, monsterfords95, montana350, Moose475, MOTO7.3, Mpoage, mrgto, mspowerstroke, mstadler13, mstng85514, Mtack, mtmod50, myloyambag, naa60512, nastystroke04, nation1979, needalaugh, newpowertroker, NH OIL BURNER, nicholsjason4, Nomad1671, Northcountrywood, np205, npen, Nuzzlenut, old man dave, old Smokey, oldschool, olsmokey, onebad97, opieg01, otis_301, Ottomatic, OUTLAW-OFFROAD, OUTLAW101, outlaw5.0, PAbowhunter, PahStroke, Papaq, Peterbiltman79, Phiber Optik, PHPDiesel, pilot4life, PJB, porkchop, Posjr, Powerstoke_Fan, powerstroke02, powerstroke742008, PowerstrokeR00, prostreet67, pscooter6, psd kid, pstk5088, pstroker73, Pubsmack, Pure Evil, purple_heart_350, PWRstroke_smoke, rake18, RC4WD, rcsteelman, rdlewis, rebel6.0, ReconDieselPerformance, RichWT, rickvm, riverjet, Roanie, Robles4242, rockdog, RockinJW, rogers250, rollingthunder, Ron's power stroke, ronark, Roots, ross3031, roughneck0913, rpm-inc, rsbhunter, ruffneck7.3, rusty1161, Ryan444, sanocafire20, savvy1, Scerb, Schneider 86, scott2001, Scottapher, scrapperdude, sdjohnny, Sea97Stroker, SeeYa, seg_97, Selectcmpr, seven.3psd, sgleshot, shawnberrier, shaynep, shmokenpstroke, silverhoss99, simpleman, six8, skav, SKWERL, Slated4Greatness, sling, slippydaman, SLO DZL, smith7.3, Smokediver3, smokeuout09, SmokeWithEveryStroke, smokindiesel2, smokinstroker92, sniper_101, snookmanaaron, snowball, solrac06, SouthJerseyStroker, southmike, spdmpo, squeak12, sslong, Staggs02, stalyon, steinberger4, StockBeast, stolennitrous, stroke77450, Stroked PSD, Stroken7.3, Strokin450, sunny644, sunstroke, Super_Hauler, SyN, SZYD, t444epsd, tank, TARM, tbutera2112, tch.280, ten speed, terrye, texans, texasredneckjae, thecabinetguy, theCOYfish, thinmint, tholt34, Thomas A, TimberPro, tneibling, tomato76, Toms014x4, TomzToyz2, tonka350, Toymachine, tpull3, tree trimmer, treyloco, TRUBBS, truckpullin_75, tvmechanic21, twelch3, twoicebergs, Tyson42, UNCOOL, van2002, vegasfmf, vintage way, waltenbach, wcpresley, WelchyBoy833, WhiteTrash7.3L, wildstang3, WishinIwerFishin, wolfmanfpd, workrig2000, worm5932, wsigo, xstrokinx, youngPSD, zvovchik
Thread Tools
Display Modes


Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:29 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.